PERMABOND ET5147 Food Grade Epoxy Slow Set 40-60 min, Thixotropic Thick Gel Off White
In stock
Regular price
$ 17.49 USD
19 units available
Need Datasheets?
Click Here to visit our Datasheet Server (TDS, SDS, Fact Sheets, Selector Guides, etc)Permabond ET5147 Two Component Epoxy is used for structural bonding of metal, wood, and certain plastics. It has high shear, peel, and impact strength making it useable on a wide variety of substrates. Set time 40-60 min
Permabond ET5147 meets a few regulatory specs:
Substitute for Loctite 2046, which has been discontinued
1) Food Grade FDA Approved, CFR 175.105 and CFR 175.300
2) Plastics Regulation 10/2011, a sub-section of the European Framework Regulation EU 1935/2004
Typical Use: | Used for structural bonding of metal, wood, and certain plastics. |
Chemical Composition: | Part A: Epoxy resin; Part B: Polyamine hardener |
Color: | Part A: White; Part B: Ivory |
Components: | 2 part |
Cure System: | Room Temperature |
Dielectric Strength: | 15 to 25 kV/mm |
Flash Point: | >100 °C |
Gap Filling: | 2 mm |
Hardness: | 68 to 72 D |
Mix Ratio: | 2:1 by volume |
Specific Gravity: | Part A: 1.3; Part B: 1.2 |
Viscosity: | Part A: 250,000; Part B: 11,000 |
Visit our datasheet server to download a variety of documents for this formula, as well as for all other formulas and products that Perigee Direct carries.
And especially if you are considering or comparing a few different formulas. Our datasheet server can help you download the necessary data to help u decide and keep your project going.
Click Here to visit our Datasheet Server (TDS, SDS, Fact Sheets, Selector Guides, etc)
And especially if you are considering or comparing a few different formulas. Our datasheet server can help you download the necessary data to help u decide and keep your project going.
Click Here to visit our Datasheet Server (TDS, SDS, Fact Sheets, Selector Guides, etc)