LORD 320/322 Thick Gel Medium-Set 20-40 minute General Purpose Epoxy Adhesive (3003632, 3003631)

SKU: LORD_320/322_3003632_050ML

Need Datasheets? Need Accessories?

• Click Here to visit our Datasheet Server (TDS, SDS, Fact Sheets, Selector Guides, etc)
• Check out Popular Accessories below by scrolling down just a bit on this page.
Size
Select the Kit needed
Regular price $ 31.38 USD
($ 0.62 USD per Milliliter)
43 units available

Volume Discounts

6 units @ $ 29.82 ea, saving 5%

12 units @ $ 28.87 ea, saving 8%

36 units @ $ 28.25 ea, saving 10%

Add Mixing Nozzles for the 50ml Cartridges
Add Mixing Nozzles for the Larger Cartridges (200ml to 1500ml)
Add Dispensers for 50ml & Similar Sized Smaller Cartridges
Add Dispensers for 200ml Cartridges
Bonding Rubber or Difficult Plastics? Add the Right Primer
43 units are available

Want a Delivery Estimate?

SKU

  • SKU LORD_320/322_3003632_050ML

Product Information

LORD 320/322 adhesive is a general purpose, two-component epoxy adhesive system formulated for primerless adhesion to automotive sheet molded compounds (SMC).

This adhesive system also provides excellent adhesion to prepared metals, rubber, fiberglass reinforced plastics (FRP), polyester thermosets and thermoplastics, and many other materials. LORD 320/322 adhesive can be either room temperature cured or heat cured for faster processing.

If bonding with cured rubber, treat the rubber surface with Lord 7701 adhesion enhancer to strengthen the rubber-side of the bond. This adhesive system also bonds metals and plastics, both thermosets and thermoplastics.

Shelf Life

Shelf life is two years from date of manufacture when stored at 60-80°F (16-27°C) in original, unopened container.

Features and Benefits

Durable - provides load bearing properties equal to or greater than the materials being bonded; provides impact resistance down to -40°F (-40°C) and extreme durability through superior inhibition of crack propagation.

Set time is 20-40 min

Environmentally Recommended - contains no solvent, nonflammable and virtually odorless.

Environmentally Resistant - resists humidity, sunlight, salt spray and temperature extremes.

High Temperature Resistant - resists postbakes up to 400°F (204°C).

Chemically Resistant - solvent resistant when cured; anti-corrosion processes including phosphatizing and ELPO (e-coat) coatings do not affect the adhesive or its bond strength. Continuous immersion in solvents is not recommended.

Typical Properties*


Work Time, min @ 75°F (24°C), 54 g mass 20-40
Time to Handling Strength**, hr 2-4
Cure Time**, hr 24
Mixed Appearance Grey Paste
Mixed Solids Content by Weight, % 100