LORD Maxlok T18 MX 4:1 Ratio Medium Set 18-24 min Acrylic Adhesive non-sagging, and resistance to temperature
Need Datasheets? Need Accessories?
• Click Here to visit our Datasheet Server (TDS, SDS, Fact Sheets, Selector Guides, etc)• Check out Popular Accessories below by scrolling down just a bit on this page.
Regular price
$ 29.99 USD
Call for ETA
| Discounts by Volume | % Off | Unit Price |
|---|---|---|
12 + | 5% | $ 28.49 |
36 + Most Popular | 8% | $ 27.59 |
60 + | 12% | $ 26.39 |
LORD Maxlok MX/T18 is a non-sag acrylic adhesive that is temperature and environmentally resistant. Maxlok MX/T18 performs at temperatures from -40 to +149°C and cure begins immediately once the adhesive and accelerator are mixed.
Features and Benefits:
- Versatile – bonds a wide range of unprepared metals with minimal substrate preparation.
- Temperature Resistant – performs at temperatures from -40 to +300°F (-40 to +149°C).
- Environmentally Resistant – resists dilute acids, alkalis, solvents, greases, oils, moisture, salt spray and weathering; provides excellent resistance to indirect UV exposure.
- UL Rated – Maxlok MX/T6 adhesive system is UL 746C certified.
- Precise Bondline – allows precise control of adhesive bondline thickness due to its content of glass beads, 0.01″ (0.025 cm) diameter.
- Non-Sag – remains in position when applied on vertical or overhead surfaces, allowing for greater process flexibility
Typical Use:
Replace riveting, welding and other mechanical fastening methods in a range of temperature environments
One or Two Component:
Two Component
Mixed Appearance:
Gray Paste
Cure Time:
24 hours
Working Time @ 25°C:
18-24 minutes
Flash Point:
15°C
Elongation:
>10%
Viscosity @ 25°C:
70,000 to 220,000 cP
Temperature Range:
-40°C to +149°C
Tack Free Time:
48 to 72 minutes
Shelf Life:
9 months
