(Discontinued) Plexus MA685 Clear 10-minute MMA Adhesive (35ml - 68505 - Resistant to UV Temp & Chemicals

SKU: PLXS_MA685_050ML

Need Datasheets? Need Accessories?

• Click Here to visit our Datasheet Server (TDS, SDS, Fact Sheets, Selector Guides, etc)
• Check out Popular Accessories below by scrolling down just a bit on this page.
Size
Select the Kit needed
Regular price $ 28.99 USD
($ 0.57 USD per Milliliter)
Currently Out of Stock Call for ETA

Volume Discounts

6 units @ $ 27.55 ea, saving 5%

12 units @ $ 26.68 ea, saving 8%

36 units @ $ 26.10 ea, saving 10%

Add Dispensers for 50ml & Similar Sized Smaller Cartridges
Currently Out of Stock Place Order and Call for ETA

Want a Delivery Estimate?

SKU

  • SKU PLXS_MA685_050ML

Plexus MA685 (68505 35ml size & 68500X 490ml size) was a two-part 10:1 mix ratio Clear MMA Acrylic adhesive designed for structural bonding of thermoplastic, metal, and composite assemblies.

Effective as-of March 28, 2003, Plexus MA685 - 35ml, # 68505 was discontinued, and has been rendered no longer be available after currrent inventory is depleted.

However, we have a direct substitute/backup formula named Maven MMA4085, which is formulated as a direct complement backup fromula.

Here's the product link to the MMA4085 formula to check out.

Combined at a 10:1 ratio, MA685 had a working time of about 10 minutes. This product offered a combination of high strength and toughness (vibration & shock-resiatance) as well as the ability to bond a wide range of materials. Characteristics Room Temperature Cure Working Time 8-12 minutes Fixture Time 18 – 25 minutes Operating Temperature -67°F – 250°F (-55°C – 121°C) Gap Filling 0.03 in. – 0.125 in. (0.75 mm – 3.2 mm) Mixed Density 8.10 lbs/gal (0.97 g/cc) It had Chemical Excellent resistance to: Water, UV Light (non-yellowing) Scuffing/scratching, impacts, High Temperatures

Substitutes and Backups:

Characteristics

Room Temperature Cure

Mix Ratio by volume 10:1

Tensil Strength 3500-5500 psi

Working Time 8 – 12 minutes

Fixture Time 18 – 25 minutes

Operating Temperature - 67°F to 250°F (-55°C to 121°C)

Gap Filling 0.03 in. – 0.125 in. (0.75 mm – 3.2 mm)

Mixed Density 9.10 lbs/gal

Excellent resistance to: UV Light, Water, Vibrations, Shock, High Temperatures