
Permabond TA4550 Nylon Bonding MMA Acrylic Adhesive
Need Datasheets? Need Accessories?
• Click Here to visit our Datasheet Server (TDS, SDS, Fact Sheets, Selector Guides, etc)• Check out Popular Accessories below by scrolling down just a bit on this page.
SKU:
PBND_TA4550_50ML
Regular price
$ 34.99 USD
2 units available
Discounts by Volume | % Off | Unit Price |
---|---|---|
12 + | 5% | $ 33.24 |
36 + Most Popular | 8% | $ 32.19 |
60 + | 12% | $ 30.79 |
SKU
- Type Acrylic (MMA)
- Vendor Permabond
- SKU PBND_TA4550_50ML
PERMABOND TA4550 is a 2-part, 2:1 low odor, thixotropic (thick non-sagging gel) acrylic adhesive. It was developed for the structural bonding of nylon/polyamide (filled and unfilled) without the need for any primers or additional surface treatment, such as plasma. TA4550 is also good for bonding plastics, metals, composites, in addition to nylons.
TA4550 is the replacement for discontinued TA4660. Also, TA4550 is the official Permabond-approved direct replacement for the discontinued formula TA4660, which was also a nylon bonder.
Features & Benefits
- Excellent adhesion to nylons/polyamides (Nylon 6 & Nylon 12)
- Excellent adhesion to most plastics, metals, composites, stone, wood.
- No primers required
- Full cure at room temperature
- Low odor adhesive
- Good temperature resistance
Surfaces it bonds: Nylon, Polyamides, Polyesters, GRP's, Epoxy, PVC, PMMA's, Carbon Steel, Stainless Steel, Aluminum, Most other Metals, Wood, Ceramics, Rock, Concrete, Glass, Fiberglass
Physical Properties of Uncured Adhesive
TA4550 A | TA4550 B | |
Chemical Composition | Acrylic | Acrylic |
Color | Yellow | Blue |
Mixed Color | Dark green/grey | |
Viscosity @ 25°C | 100,000 mPa.s (cP) Thixo paste | 100,000 mPa.s (cP) |
Specific gravity | 1.0 | 1.0 |
Typical Curing Properties
Ratio to Use | 2: 1 |
Maximum gap fill (NB: Contains microparticles to control gap) | 5 mm (0.2 in) |
Pot life (2g+2g) @23°C | 3-5 minutes |
Fixture time (0.1 N/mm² shear strength is achieved) @23°C | 5-10 minutes |
Handling time (0.3 N/mm² shear strength is achieved) @23°C | 60 minutes |
Working strength @23°C | 2 hours |
Full cure @23°C | 24 hours |
Visit our datasheet server to download a variety of documents for this formula, as well as for all other formulas and products that Perigee Direct carries.
And especially if you are considering or comparing a few different formulas. Our datasheet server can help you download the necessary data to help u decide and keep your project going.
Click Here to visit our Datasheet Server (TDS, SDS, Fact Sheets, Selector Guides, etc)
And especially if you are considering or comparing a few different formulas. Our datasheet server can help you download the necessary data to help u decide and keep your project going.
Click Here to visit our Datasheet Server (TDS, SDS, Fact Sheets, Selector Guides, etc)