Nordson Series 260 Wide Mixing Nozzle for thinck material - 2 sizes: 24-element 11.7 in 7701770) and 18-element 9.1in (7701758) x 13mm inner diameter ID
Need Datasheets? Need Accessories?
• Click Here to visit our Datasheet Server (TDS, SDS, Fact Sheets, Selector Guides, etc)• Check out Popular Accessories below by scrolling down just a bit on this page.
Regular price
$ 3.29 USD
1243 units available
| Discounts by Volume | % Off | Unit Price |
|---|---|---|
10 + | 5% | $ 3.13 |
40 + | 10% | $ 2.96 |
100 + | 15% | $ 2.80 |
1000 + | 20% | $ 2.63 |
Nordson EFD 260 Series Construction Wide Diameter Mixing Nozzle. Universal mixing nozzles / tips for all standard C-System 200ml, 400ml, 600ml and 1500ml 2-Part epoxy and adhesive cartridges in all ratios (1:1, 2:1, 4:1 and 10:1).
Two Lengths:
- 18-Element Part # 7701758 : 9.1in (23.11mm) length, 0.5in (12.8mm) inner diameter
- 24-Element Part # 7701770 : 11.7in (29.72mm) length, 0.5in (12.8mm) inner diameter
The 260 series is a wide helix (round) nozzle 1/2 inch in inner diameter, and is designed to work with thicker highly viscous materials. It has a bell-style inlet, meaning it is the most universal inlet, simply pressed onto the cartridge outlet, and then screw the retaining nut atop the nozzle and back onto the cartridge. It has a stepped tip so facilitates clean notching and cutting for wider outlets if needed.
Use these mixers with: Epoxy, Silicone, Urethane, Foam Urethane, Acrylic, Polyesters
Works perfectly with the following Brands of larger (C-System) adhesive cartridges: Loctite EA , 3M Scotch Weld, Devcon, Plexus, Huntsman, Araldite, Lord, MG Chemicals, Permabond, Masterbond, and all other brands that use the following 200ml, 400ml, 600ml, 1500ml, and related cartridge types. Works with all standard C-System cartridges by Sulzer MixPac, and 2k cartridges by Nordson EFD. Each Pack includes the same number of mixing nozzles plus the related inner/inside mixing assembly
