Araldite 2042 Rapid Cure Polyurethane adhesive for most plastics
Need Datasheets? Need Accessories?
• Click Here to visit our Datasheet Server (TDS, SDS, Fact Sheets, Selector Guides, etc)• Check out Popular Accessories below by scrolling down just a bit on this page.
Araldite® 2042 A/B polyurethane adhesive is a two-part, rapid-curing system that is specifically formulated for bonding plastics including polycarbonate, ABS, nylon, and 1Metton® with minimal substrate preparation. Araldite® 2042 A/B polyurethane adhesive has also been used successfully for bonding materials with differing CTEs, e.g., nylon to stainless steel. Once cured, it features good environmental stability and impact resistance.
If out of stock, the following formulas are candidate backup formulas to Araldite 2042
| Formula | Type | color | set time | viscosity | tensil strength | sheer strength | Shore D Hardness | Elongation |
| araldite 2042 | Polyurethane | Pink | 3 min | 50000 cp (flowable medium) | 2100 psi | 1450 psi aluminum 800 psi Metton |
85 | 250% |
| araldite 2040 | Polyurethane | Gray | 15 min | 50000 cp (flowable medium) | 2100 psi | 1250 psi aluminum 500-1000 psi most plastics |
85 | 250% |
| Permabond PT321 | Polyurethane | Gray | 1-2 min | 5000 cp (flowable low-medium) | 2900-3600 psi | 900-1200 psi | 70-80 | <10% |
| Permabond PT326 | Polyurethane | Gray | 5 min | 5000 cp (flowable low-medium) | 2300-3600 psi | 900-1200 psi | 65-75 | <15% |
| Permabond PT328 | Polyurethane | Gray | 15-20 min | 5000 cp (flowable low-medium) | 2200-2900 psi | 700-2000 psi | 60-75 | <20% |
| Lord 7100 | Urethane | Black | 5-10 min | 45000 cp (flowable medium) | ||||
| Lord 7150 | Urethane | Gray | 5-10 min | 45000 cp (flowable medium) | ||||
| Lord 7542 A/B | Urethane | Brown | 5 min | 5000 cp (flowable low-medium) | ||||
| Lord 7545 A/B | Urethane | Brown | 5 min | 350,000 cp (Non-Sag Gel) | 3000 psi | 67 | ||
| Lord 7550 A/B | Urethane | Clear/Yellowish | 3-5 min | 5000 cp (flowable low-medium) |
Features
- Rapid Cure
- High Strength
- Excellent Flexibility
- Convenient Mix Ratio
- Bonds a Wide Variety of Materials
- Impact Resistant
- Environmentally Stable
Applications
- Polycarbonate
- ABS
- Nylon
- Metton
- Bonding Materials With Differing CTEs, e.g. Nylon to Stainless Steel
Please Note: These cartridges are designed to work best with a 50ml Dispensing dispenser. We advise you use the correct Dispenser to maximize efficiency and minimize waste. If you do not have one, please check out our Dispensers; all are excellent products and have our seal of approval.
If you prefer not to use a Dispenser, there is an option for a manual hand plunger or a caulking dispenser adapter that you can use for fast small jobs.
Storage
When stored in a dry place in their original sealed containers at a temperature within 36°F to 104°F (+2°C and +40°C) both components of Araldite® 2042 A/B have a 1 year shelf-life from date of shipment. Araldite® 2042 A/B should not be exposed to direct sunlight. The temperature of both components should be above 18°C (65°F) prior to mixing. These products are moisture sensitive and are packaged under a blanket of dry nitrogen. After opening a container, re-blanket with dry nitrogen and then tightly reseal containers.
Additional information is available by consulting the Technical Data Sheet (TDS). Just ask for it!