Discontinued - Araldite 2040 Flexible Thick Gray 15-min Polyurethane (PUR) adhesive great for Plastics
Need Datasheets? Need Accessories?
• Click Here to visit our Datasheet Server (TDS, SDS, Fact Sheets, Selector Guides, etc)• Check out Popular Accessories below by scrolling down just a bit on this page.
Regular price
$ 27.99 USD
Call for ETA
Product Description
Araldite® 2040 polyurethane adhesive is a general-purpose, two-part system for bonding a wide variety of substrates. The cured material is very flexible. Araldite® 2040 polyurethane adhesive is well suited for bonding polycarbonate and polyamides as well as primed metals.
Replacement/Substitute Formulas:
| Formula | Type | color | set time | viscosity | tensil strength | sheer strength | Shore D Hardness | Elongation |
| Araldite 2040 (this product) | Polyurethane | Gray | 15 min | 50000 cp (flowable medium) | 2100 psi | 1250 psi aluminum 500-1000 psi most plastics |
||
| Permabond PT321 | Polyurethane | Gray | 1-2 min | 5000 cp (flowable low-medium) | 2900-3600 psi | 900-1200 psi | 70-80 | <10% |
| Permabond PT326 | Polyurethane | Gray | 5 min | 5000 cp (flowable low-medium) | 2300-3600 psi | 900-1200 psi | 65-75 | <15% |
| Permabond PT328 | Polyurethane | Gray | 15-20 min | 5000 cp (flowable low-medium) | 2200-2900 psi | 700-2000 psi | 60-75 | <20% |
| Lord 7100 A/B | Urethane | Black | 5-10 min | 45000 cp (flowable medium) | ||||
| Lord 7150 A/B | Urethane | Gray | 5-10 min | 45000 cp (flowable medium) | ||||
| Lord 7542 A/B | Urethane | Brown | 5 min | 5000 cp (flowable low-medium) | ||||
| Lord 7545 A/B | Urethane | Brown | 5 min | 350,000 cp (Non-Sag Gel) | 3000 psi | 67 | ||
| Lord 7550 A/C | Urethane | Clear/Yellowish | 3-5 min | 5000 cp (flowable low-medium) |
Features
- Ideal for bonding plastics
- Low shrinkage
- Good flexibility
- Ideal for thick bondlines
- Gap filling properties
PretreatmentThe strength and durability of a bonded joint are dependent on proper treatment of the surfaces to be bonded. At the very least, joint surfaces should be cleaned with a good degreasing agent such as acetone, isopropanol (for plastics) or other proprietary degreasing agents in order to remove all traces of oil, grease and dirt. Low-grade alcohol, gasoline, or paint thinners should never be used. The strongest and most durable joints are obtained by either mechanically abrading or chemically etching (“pickling”) the degreased surfaces. Abrading should be followed by a second degreasing treatment.
Please Note: These cartridges are designed to work best with a 50ml Dispensing dispenser. We advise you use the correct Dispenser to maximize efficiency and minimize waste. If you do not have one, please check out our Dispensers; all are excellent products and have our seal of approval.
If you prefer not to use a Dispenser, there is an option for a manual hand plunger or a caulking dispenser adapter that you can use for fast small jobs.
Additional information is available by consulting the Technical Data Sheet (TDS). Just ask for it!