Permabond UV630 thin, low viscosity Medical Grade UV glue great for clear plastics and clear glass
Need Datasheets? Need Accessories?
• Click Here to visit our Datasheet Server (TDS, SDS, Fact Sheets, Selector Guides, etc)• Check out Popular Accessories below by scrolling down just a bit on this page.
PERMABOND UV630 is a single part, fast setting, and UV curable adhesive designed specifically for bonding plastics. This material has excellent adhesion to a variety of plastics including polycarbonate. Permabond UV630 has very high shear strength, elongation and impact resistance making it ideal for applications that require substrates with different coefficients of thermal expansion
- Cure on demand
- Medical Grade / Medical Device Approved adhesive
- High Clear UV resistant when dried
- Low Viscosity, High-Flowability, will drip
- Excellent bonds with Clear Plastics like Polycarbonate, PVC Clear, Acrylic, etc
- Wicking into small cracks and crevices
- High shear strength
- Fast curing with low-power lamps
- 100% solids, no solvents
- Excellent adhesion to plastics
Physical Properties of Uncured Adhesive
| Chemical Composition | Methacrylate ester |
| Viscosity @ 25°C |
20 rpm: 200 to 300 mPa.s (cP) |
| Specific Gravity | 1.0 |
Performance Characteristics
|
UV Curing Wavelength |
365 - 400 nm |
|
UV Curing Time (by strength of light) |
Low power 4mW/cm² battery lamp: 5 secs |
|
Tensile Strength |
1450psi (10 N/mm^2) |
|
Shear Strength |
Glass to Steel: 900psi to 1000psi 6 to 7 N/mm²) Polycarbonate: >9 N/mm² * (>1300 psi) |
|
Temperature Resistance |
212f (100C) 60% strength 302f (150C) 18% strength |
|
Appearance |
High Clarity, Colorless, Optically Clear, Transparent |
|
Elongation (ISO37) |
110% |
|
Hardness (ISO868) |
60 Shore D |
