Nukote Premera T2 Silocone Dioxide (SiO2) Protective Clear Coats for Metals & Concrete, Liquid Glass Sealant (aka IONYX T2)
Metal and concrete assets have a hard time withstanding just structural loads, much less environmental attacks. Tiny things like water, fuels, and salt fog literally eat them up.
Stop metal corrosion and concrete disintegration without adding structural load. Protect from not just one, but a wide, comprehensive list of environmental factors. Premera T2 Coats blow away the competition with unmatched chemical bonding and unbelievable nanoscale coverage over any surface profile. Extremelly long lasting & low maintenance.
The Premera T2 provides an ultra-durable, wear resistant clear coating. It avoids common protection failures like peeling or flaking. Ionyx T2 for Metal & Concrete can be applied over the complimentary product Premera AT1 Quick Seal & Enhance for a complete concrete protection system.
Surfaces to Use on:
- Concrete (flooring, walls, cinder blocks & concrete blocks, unglazed brick & tile, pavers, countertops)
- Raw Metals (Carbon Steel, Stainless Steel, Galvanized Steel, Iron, Aluminum, Copper, Brass, Bronze)
- Painted & Coated Metals (powder coated, primed, painted, existing sealants)
Popular for coating: Tons of uses: Autos/Vehicles, Campers, Mobile Homes, RVs, Public Works Bridges, Tables, Concrete Flooring, Countertops, Shop Floors, Protecting Floor Markings, High Traffic Flooring, Street Signs, Park Signs, Outdoor Signage
Industries currently using: Aviation, Airliners, Manufacturing, Municipalities, Government, Military, Restaurants, Auto Dealerships, Cabinet Makers, Sign Makers,
- Thin ultra-hard impervious quartz layer atop metal and concrete
- Anti Corrosion, stops it dead
- Resists Fuel & Oils
- Resists Hydrolic Fuels, even Skydrol
- Resists Graffiti, Inks, Dyes
- Moisture Repellent, Hydrophobic
- Hard and yet Flexible (because the coat layer is thin)
- Scratch resistant
- Extreme Heat resistant
- High Abrasion Resistant
- No Flaking, No Pealing
- Resists Animal & Organic Waste
- Resists Salts, Chlorides, & De-Icers, even
- Chemically inert and corrosion resistant
- Prevents oxidation, UV damage, and moisture damage
Superior resistance against:
- Rust & Oxidation
- Acid Rain & Acidic Damage
- Ice Damage
- Chlorides & salt spray
- UV damage
- Galvanic corrosion
- Animal, Bird & Organic waste damage
Available in: 8-oz Spray, Quart Kit, Gallon Kit, 5-Gallon Kit, 250-Gallon Tote
How to apply:
Pressure sprayers: Apply using standard high-volume low-pressure sprayer (HVLP… popular with paint spraying and airbrushing) or hand-pump pressure sprayers with a 1.0-1.3 spray tip and air pressure set at 25 to 30 psi. Spray test pattern on cardboard or paper to ensure suitable 8“to 10” elongated spray pattern is achieved (approximately 1 ½ inch wide in the middle and fluid enough to cover but not puddle). Apply two thin coats, wet-on-tack, 2-3 WFT each, top to bottom, then right to left, keeping a wet edge. Second coat must be applied within 10-15 minutes while first coat is still tacky for optimum results.
Standard Paint Rollers: Use a high density ultra-smooth foam roller or ¼ inch nap roller to apply the coating in an up and down then left to right pattern to ensure complete coverage of the surface. Avoid overworking coating. Apply coating thinly, 2.0 to 3.0 wet film thicknesses (WFT) and continue forward. Avoid down pressure on the roller for best results in finish appearance.
Brush Application: Use high-quality China bristle to apply T2AM in a cross-pattern; up and down, then left and right as quickly as possible. Avoid overworking coating, as it dries quickly. Avoid down pressure on the brush for best results in finish appearance. Apply light strokes using the tip brush to smooth out coating if necessary. Desired wet film thickness (WFT) is approximately 2.0 to 2.5 mils.
Dip Application: Apply a blanket of nitrogen gas over Premera T2 SS in dip tank to prevent flashing of solvents and evaporation of product. Dip and agitate items (back and forth, up and down); remove to dry rack.