Insulcast I-Cast 333 Neutral Epoxy Potting Compound
Need Datasheets? Need Accessories?
• Click Here to visit our Datasheet Server (TDS, SDS, Fact Sheets, Selector Guides, etc)• Check out Popular Accessories below by scrolling down just a bit on this page.
SKU:
INSL_I-CAST333NEU_05G_KIT_IC20
Regular price
$ 881.53 USD
Currently Out of Stock
Call for ETA
SKU
- Type Epoxy Potting Compound
- Vendor Insulcast
- SKU INSL_I-CAST333NEU_05G_KIT_IC20
Insulcast 333 Neutral is a self-extinguishing epoxy potting and casting compound for electronics that have to survive heat, moisture and vibration. It is UL 94 V-0 recognized (UL file E86165), moderate in viscosity, and filled for thermal conductivity, so it carries heat away from coils, transformers and power components while it seals them in. The neutral color lets you see the potted assembly after cure for inspection or rework.
333 Neutral is the resin (Part A). It cures with an Insulcure hardener (Part B), and the hardener you pick sets the pot life, the cure schedule and the service temperature. Buy it as a kit with the hardener matched to the pail, or buy the resin alone if you already stock hardener. If you want the components hidden, look at Insulcast I-Cast 333 in black.
Features and Benefits
- UL 94 V-0 self-extinguishing: recognized under the UL component program, file E86165.
- Moves heat: thermal conductivity of about 0.62 W/mK pulls heat out of hot-running parts.
- Two hardener choices: Insulcure 20 for room temperature cure and a 1 hour pot life, or Insulcure 11B for a 2.5 hour pot life and 155°C (311°F) service after heat cure.
- Electrical isolation: 410 to 430 volts/mil dielectric strength and 1 x 1015 ohm-cm volume resistivity.
- Rigid and strong: Shore D 85, 11,500 to 12,000 psi tensile and up to 19,500 psi flexural strength.
- See what you potted: neutral resin color for visual inspection after cure.
Choose Your Option
Each kit is one 5 gallon pail of 333 Neutral resin plus the matching Insulcure hardener, shipped together. Kits are sold as Fresh Batch only. The resin-only pail is also offered as Short Shelf Life and Recently Expired at a discount.
| Option | What You Get | Mix Ratio by Weight | Pot Life (100 g @ 77°F) | Cure | Service Temperature |
|---|---|---|---|---|---|
| 5 Gallon Kit with Insulcure 20 | 1 x 5 gal pail 333 Neutral + 1 x 1 gal Insulcure 20 | 100:12-16 | 1 hour | 8 to 12 hr at 77°F, or 2 hr at 122°F | Up to 105°C (221°F) |
| 5 Gallon Kit with Insulcure 11B | 1 x 5 gal pail 333 Neutral + 3 x 1 qt Insulcure 11B | 100:8 | 2.5 hours | Heat cure, 2 hr at 212°F (see below for large masses) | Up to 155°C (311°F) |
| 5 Gallon Pail, Resin Only | 1 x 5 gal pail 333 Neutral, no hardener | Use with Insulcure 20 or Insulcure 11B, sold separately | |||
How much hardener: the gallon of Insulcure 20 covers a full pail at 100:12. If you run toward 100:16, plan on extra Insulcure 20. Three quarts of Insulcure 11B covers a full pail at 100:8 with a little to spare. Extra Insulcure 11B is sold in quarts and gallons.
Technical Specifications
Uncured properties
| Property | Insulcast 333 Neutral | Insulcure 20 | Insulcure 11B |
|---|---|---|---|
| Color | Neutral | Amber | Amber |
| Viscosity @ 77°F (25°C) | 13,000 cP | 700 cP | 700 cP |
| Specific gravity | 1.55 | 0.98 | 0.95 |
| Mix ratio by weight | 100 | 12 to 16 | 8 |
| Mixed viscosity | - | 3,000 cP | 3,000 cP |
| Pot life, 100 g @ 77°F | - | 1 hour | 2.5 hours |
| Shelf life @ 77°F | 12 months | 12 months | 12 months |
Cured properties
| Property | With Insulcure 20 | With Insulcure 11B |
|---|---|---|
| Hardness (ASTM D2240) | Shore D 85 | Shore D 85 |
| Tensile strength (ASTM D638) | 11,500 psi | 12,000 psi |
| Tensile elongation | 2.75% | 3.75% |
| Flexural strength (ASTM D790) | 17,500 psi | 19,500 psi |
| Compressive strength (ASTM D695) | 14,000 psi | 14,500 psi |
| Coefficient of thermal expansion | 48 x 10-6 /°C | 48 x 10-6 /°C |
| Thermal conductivity | 4.3 BTU-in/ft²·hr·°F (about 0.62 W/mK) | 4.2 BTU-in/ft²·hr·°F (about 0.61 W/mK) |
| Heat distortion point | 80°C (176°F) | 155°C (311°F) |
| Service temperature | 105°C (221°F) | 155°C (311°F) |
| Dielectric strength (ASTM D149) | 410 volts/mil | 430 volts/mil |
| Dielectric constant, 1 kHz (ASTM D150) | 4.4 | 4.5 |
| Dissipation factor, 1 kHz (ASTM D150) | 0.02 | 0.02 |
| Volume resistivity (ASTM D257) | 1 x 1015 ohm-cm | 1 x 1015 ohm-cm |
| Flammability | UL 94 V-0, file E86165 | UL 94 V-0, file E86165 |
Data is typical (ITW Technical Bulletin #3118) and not for specification. Test your own parts before production.
How to Use
- Premix the resin: stir 333 Neutral in its original pail until any settled filler is fully back in suspension.
- Weigh, don't eyeball: weigh out the resin, then weigh in the hardener at 100:12-16 for Insulcure 20 or 100:8 for Insulcure 11B.
- Mix: blend thoroughly, scraping the sides and bottom of the container.
- Degas: pull vacuum for 2 to 5 minutes if you need void-free castings.
- Pour: fill the cavity or mold inside the pot life.
- Cure: with Insulcure 20, 8 to 12 hours at 77°F (25°C) or 2 hours at 122°F (50°C). With Insulcure 11B, 2 hours at 212°F (100°C) for masses under 1/2 lb. For larger masses, cure 2 hours at 176°F (80°C) then 2 hours at 212°F (100°C). For the best high temperature properties, post cure 1 hour at 302°F (150°C).
Storage and Shelf Life
Shelf life is 12 months at 77°F (25°C) for the resin and both hardeners. Store in a cool, dry place with lids tight. The filler settles in shipping and storage, so remix the resin well before every use. Our "Short Shelf Life" and "Recently Expired" resin options are priced for shop use where you will use the material quickly. Run a test pour before using older material on production parts.
Safety and Shipping
The resin causes skin and eye irritation and may cause an allergic skin reaction. Both hardeners are corrosive amines that cause severe skin burns and eye damage, and Insulcure 20 also carries reproductive toxicity and inhalation warnings. Wear chemical-resistant gloves and eye protection, work with good ventilation, and read each Safety Data Sheet before use. Intended for industrial and commercial use by trained users.
All options ship as regulated hazardous materials:
- Insulcast 333 Neutral resin: UN3082, Environmentally hazardous substance, liquid, n.o.s., Class 9, Packing Group III, marine pollutant
- Insulcure 20: UN2735, Amines, liquid, corrosive, n.o.s., Class 8, Packing Group II
- Insulcure 11B: UN2922, Corrosive liquid, toxic, n.o.s., Class 8 (6.1), Packing Group II
What It Is
Insulcast 333 Neutral is a self-extinguishing, thermally conductive epoxy potting and casting resin rated UL 94 V-0. It cures with Insulcure 20 at room temperature or Insulcure 11B with heat, and the neutral color leaves the potted assembly visible after cure.
Popular Uses
- Potting power supplies, transformers, inductors and coils
- Encapsulating sensors, connectors and control modules
- Casting electrical insulators and housings
- Potting LED drivers and lighting electronics
- Encapsulating EV, motor drive and power conversion electronics
- Assemblies that need visual inspection or rework access after cure
Problems It Solves
- Meets UL 94 V-0 flammability requirements for potted components
- Pulls heat out of hot-running coils and power parts
- Seals out moisture, dust and contaminants
- Locks components against shock and vibration
- Keeps the potted assembly visible for inspection
Industries That Use It
- LED / Electronics
- Power Electronics and Energy
- Transportation / EV
- Aerospace / Defense
- Industrial Controls
- General Manufacturing
Key Properties
- Mix ratio by weight: 100:12-16 with Insulcure 20, or 100:8 with Insulcure 11B
- Pot life @ 77°F: 1 hour (Insulcure 20), 2.5 hours (Insulcure 11B)
- Cure: 8 to 12 hr at 77°F (Insulcure 20), or 2 hr at 212°F (Insulcure 11B)
- Mixed viscosity: 3,000 cP
- Hardness: Shore D 85
- Thermal conductivity: about 0.62 W/mK
- Dielectric strength: 410 to 430 volts/mil
- Service temperature: 105°C (221°F), or 155°C (311°F) with Insulcure 11B
- Flammability: UL 94 V-0, file E86165
- Shelf life: 12 months @ 77°F
Bonds To
- Copper windings, magnet wire and metal lead frames
- Aluminum and steel housings
- FR-4 and other circuit board laminates
- Ceramic and glass components
- Most engineering plastics used in electronic housings
Formula Family and Alternatives
- Insulcast I-Cast 333 (black): same resin family in black when you want components hidden
- Insulcast I-Cast 116 FR and 116 FRFC: other UL 94 V-0 flame retardant epoxy potting compounds
- Insulcast RTVS 27 series: flexible RTV silicone potting when you need low stress or easy rework
- Insulcure 20 and Insulcure 11B hardeners, sold separately for resin-only buyers
Visit our datasheet server to download a variety of documents for this formula, as well as for all other formulas and products that Perigee Direct carries.
And especially if you are considering or comparing a few different formulas. Our datasheet server can help you download the necessary data to help u decide and keep your project going.
Click Here to visit our Datasheet Server (TDS, SDS, Fact Sheets, Selector Guides, etc)
And especially if you are considering or comparing a few different formulas. Our datasheet server can help you download the necessary data to help u decide and keep your project going.
Click Here to visit our Datasheet Server (TDS, SDS, Fact Sheets, Selector Guides, etc)