Insulcast I-Cast 333 Epoxy Potting Compound
Need Datasheets? Need Accessories?
• Click Here to visit our Datasheet Server (TDS, SDS, Fact Sheets, Selector Guides, etc)• Check out Popular Accessories below by scrolling down just a bit on this page.
Regular price
$ 270.83 USD
Call for ETA
Insulcast I-Cast 333 is a epoxy potting compound that protects your electronics from heat, moisture, and vibration. Pour or pump it around the assembly and it cures to a tough, protective mass that keeps the finished part working in the field. Sold in multiple sizes and, where the system is two-part, in matched Part A and Part B.
Features
- Seals out moisture, dust, and contaminants
- Cushions components against shock and vibration
- Thermally conductive (0.62 W/mK) to carry heat away from hot-running parts
- Flame retardant (UL 94 V0) for fire-safety requirements
- Strong dielectric protection for reliable electrical isolation
- Backed by ITW Performance Polymers
Intended Uses
- Potting power supplies, transformers, and coils
- Sealing sensors, connectors, and control modules
- Protecting LED and lighting electronics
- Encapsulating medical device electronics
- EV and e-mobility power electronics
Physical Properties
- Mix ratio (by weight): 100:6 (Insulcure 9)
- Viscosity (Part A): 13,000 cP
- Pot life (25C): 45 min (9); 300 (11B), 60 (20), 80 (24), 120 (26)
- Cure: 8-12 hr @25C / 2 hr @50C
- Hardness: Shore D 85
- Service temp: -40 to 105 C
- Thermal conductivity: 0.62 W/mK
- Dielectric strength: 410 V/mm
- Flammability: UL 94 V0
Mix Ratio and Cure
Mix Part A and Part B at 100:6 (Insulcure 9) by weight. Cure: 8-12 hr @25C / 2 hr @50C. Degas under vacuum for a void-free pot in critical assemblies.
Shop Insulcast potting and encapsulation compounds at Perigee Direct.