Huntsman Araldite 2010-1 Toughened Fast Setting 5 to 10-Minute All-Purpose Epoxy


SKU: AR_2010-1_050ml

  • $ 149.99
    (We can use your FedEx/UPS acct: Type-in the needed Acct # & Service Level)
    Will not ship until

    Please note, Araldite 2010-1 has been discontinued by Huntsman Advanced Materials.  We keep it active as a service to inform you and our customers of this change, and also to help you locate an appropriate substitute.  Please visit our Substitite formula engine for help selecting an appropriate substitute for Araldite 2010-1.

    Araldite 2010-1 structural adhesive was a fast cure, Tougnened Thixotropic, Non-Sagging Gel Epoxy that cures/sets at room temperatures. 

    As it was toughened, it provided excellent shock, drop and vibration resistance.  It was suitable for bonding a wide variety of Metals, Ceramics, Glass, Rubbers, Rigid Plastics, Concrete, and most other materials in common use. Work Time: 5-8 minutes Handling Strength: 45-60 minutes Color: Near Translucent, Pale Yellow Dries: Clear Viscosity: Like Honey


    The Bulk Pail version of Araldite 2010-1 was :

    Araldite Cartridge Formula Araldite Bulk Resin Araldite Bulk Hardner
    Araldite 2010-1 XD 4443 XD 4444


    Please Note: These cartridges are designed to work best with a cartridge Dispenser.  We advise you use a 50ml or 200ml Dispenser for this, and all 50ml or 200ml cartridges.  If you do not have one, please check out our Dispensers, all are excellent products and have our 'it's good' seal of approval.

    If you prefer not to use a Dispenser, then we recommend considering some of our cartridge kits, which can include a manual hand plunger that you can use for fast small jobs.  Hand plungers may however prove more difficult to dispense some adhesives, especially if they're a thick or fast setting formula.

    Key Features (for this discountinued formula)

    • 5-10 Minute Working Time
    • Clear with a slight yellow tint
    • Toughened Gel, excellent shock, drop and vibration resistance
    • Excellent General Purpose Epoxy for Craftsmen, DIY, and Industrial uses
    • High Shear and Peal Strength
    • Bonds to wide variety of materials
    • Thick Viscosity for Vertical Applications


    Technical Specs

    Part Numbers

    50ml Cartridges - 4161508

    200ml Cartridges - 4161608

    Adhesive Qty

    50ml: 1.7 ounces

    200ml: 6.8 ounces

    Product Dimensions

    50ml: 6 x 3 x 1 inches

    200ml: 10x4x2 inches

    Origin Made in USA
    Item model number 2010-1
    Color Near-translucent, very pale yellow
    Material Epoxy
    Item Package Quantity 1
    Number Of Pieces 1
    Maximum Strength 3300 PSI stainless steel,  2700 PSI aluminum
    Measurement System metric
    Special Features Impact Ready
    Included Components Mixer Syringe Included
    Welcome Newcomer