Araldite 2029-1 Flexible Medium Viscosity Gray Fast Set Polyurethane (PUR) adhesive - Variety of Packaging Sizes
Araldite® 2029-1 structural adhesive is a two component, gap filling, cold curing polyurethane adhesive, consisting of a grey resin component and a beige-colored hardener component. It forms a dark grey colored, high strength, rigid bond on metal, which is ideal for for structural applications.
Please Note: These cartridges are designed to work best with a 50ml Dispensing dispenser. We advise you use the correct Dispenser to maximize efficiency and minimize waste. If you do not have one, please check out our Dispensers; all are excellent products and have our seal of approval.
If you prefer not to use a Dispenser, there is an option for a manual hand plunger or a caulking dispenser adapter that you can use for fast small jobs.
- Gap filling
- Medium open time
- High strength on metal
- Adhesion to copper and brass
The strength and durability of a bonded joint are dependent on proper treatment of the surfaces to be bonded. At the very least, joint surfaces should be cleaned with a good degreasing agent such as acetone, isopropanol (for plastics) or other proprietary degreasing agents in order to remove all traces of oil, grease and dirt. Low-grade alcohol, gasoline, or paint thinners should never be used. The strongest and most durable joints are obtained by either mechanically abrading or chemically etching (“pickling”) the degreased surfaces. Abrading should be followed by a second degreasing treatment.
Additional information is available by consulting the Technical Data Sheet (TDS). Just ask for it!