Plexus MA330 (33500) MMA Non-Sag Gel Adhesive for Plastics Metals & Composites 15-Min
Need Datasheets?
Click Here to visit our Datasheet Server (TDS, SDS, Fact Sheets, Selector Guides, etc)
DISCONTINUED PRODUCT - PLEXUS MA330 in 50ML Cartridges
We have stock at present, but once our stock in MA330 in the 50ml Cartridges has been depleted, we will not be able to acquire any additional units. Plexus MA300 and Plexus MA310 are potential substitutes.
Substitutes / Replacements for this discontinued formula:
- Plexus MA310 (very close substitute, slightly faster set time)
- Maven MMA330 (direct substitute)
- Maven MMA3010 (very close substitute, slightly faster set time)
Plexus MA330 (33500) is a two-part 1:1 mix ratio, methacrylate adhesive designed for structural bonding of thermoplastic, metal, and composite assemblies. Combined at a 1:1 ratio, MA330 has a working time of 15 to 20 minutes and reaches approximately 75% psi in 30-45 minutes. This product offers a combination of high strength and stiffness as well as the ability to bond a wide range of materials. Plexus MA330 is supplied in ready-to-use 50-ml and 400-ml cartridges, 5-gallon (20-liter) pails, or 50-gallon (200-liter) drums to be dispensed as a non-sagging gel.
.
Characteristics
Room Temperature Cure
Working Time 3 – 6 minutes
Fixture Time 12 – 15 minutes
Operating Temperature -67°F – 250°F (-55°C – 121°C)
Gap Filling 0.03 in. – 0.125 in. (0.75 mm – 3.2 mm)
Mixed Density 8.10 lbs/gal (0.97 g/cc)
Flash Point 51°F (11°C)
Chemical Resistance
Excellent resistance to: Hydrocarbons, Acids and Bases (pH 3-10), Salt Solutions
Susceptible to: Polar Solvents, Strong Acids and Bases