Maven MMA 3030 - Medium Set 15 minutes MMA Adhesive - Medium Viscosity White 1:1 ratio


SKU: MV_MMA3030_050ML

  • $ 249.99
    Will not ship until

    maven MMA3030 is a two-part methacrylate adhesive suitable for structural bonding of various metals, plastics and composites. The product does not need surface preparation or primer. This is a 1:1-part methacrylate adhesive with an open time of 15 minutes and handling strength can be achieved in less than 30 minutes. Give excellent bond strength with stiffness. Bonds a wide variety of metals including galvanized surfaces and plastic assemblies.

    Please Note:  These cartridges are designed to work best with a 50ml or 400ml cartridge Dispenser, respectively.  We advise you use a 50ml or 400ml Dispenser for all respective cartridges.  If you do not have one, please check out our Dispensers, all are excellent products and have our 'it's good' seal of approval.

    If you prefer not to use a Dispenser, we have some 50ml kits that include hand tools or caulking dispenser adapters, as pictured, that you can use for fast small jobs.  But the 400ml cartridges really need to use a 400ml Dispenser, they're just too big to effectively use without the dispenser.

    Key Features

    • 14-18 Min Working Time (10 gm mass)
    • Fast-Set MMA for Craftsman and Industrial uses
    • Excellent strength and stiffness
    • Structural bonding of a variety of metals and plastics
    • Gap filling 0.75mm-3.0mm (.03in-.12in)
    • Resistant to hydrocarbons, acids and bases. Susceptible to polar solvents.

     Cured Product Characteristics

    Color: White
    Work life (10 gm mass): 14-18 minutes
    Handling strength: 30-45 minutes
    Full cure: 24 hours
    Mixing Ratio: 1:1

    Operating temp: -50F to 250F (-45C to 121C)

    Properties of uncured material (Resin)
    Specific Gravity: 1.0
    Viscosity@25°C, cP: 50,000 - 80,000
    Color: Off white

    Properties of uncured material (Activator)
    Specific Gravity: 0.96
    Viscosity@25°C, cP: 50,000 - 80,000
    Color: White/Black

    Mechanical Properties
    Tensile Strength: 3200-4500 psi
    Lap Shear Strength, psi: 2800-3800
    Modulus, psi: 130,000-175,000
    Chemical resistance: Excellent resistant to hydrocarbons, acids and bases; susceptible to polar solvents.

    Directions of applications
    Wipe off and degrease the surface to be bonded. Use eye protection and gloves to avoid skin contact. Dispense a desirable amount of adhesive using a dispensing dispenser. The nozzle sizes can be selected according to the desired bond thickness. Join the substrates with the specified work-life of this material and allow it to cure at room temperature. Do not disturb the parts during the curing process. Excess adhesive can be wiped off.

    Safety and handling
    Wear eye protection and gloves. Harmful if swallowed. Keep it away from heat, flames. Keep out of reach of children. Once used keep the containers closed.

    Storage and shelf life
    Store this product in a tightly closed container in a cool and well-ventilated area. Product should not be frozen. Keep it away from any source of heat. Store the material in between 51℉ to 75℉. Continuous exposure above 75℉ will reduce the shelf life.

    Welcome Newcomer