DISCONTINUED - Araldite 2041 Thick 15-min Polyurethane adhesive for most plastics
Need Datasheets? Need Accessories?
• Click Here to visit our Datasheet Server (TDS, SDS, Fact Sheets, Selector Guides, etc)• Check out Popular Accessories below by scrolling down just a bit on this page.
Regular price
$38.00 CAD
Call for ETA
This Product has been discontinued by the Manufacturer, however we are leaving this page live so you can view the Product Details and find a suitable substitute adhesive.
Replacement/Substitute Formulas:
| Formula | Type | color | set time | viscosity | tensil strength | sheer strength | Shore D Hardness | Elongation |
| Araldite 2041 (this product) | Polyurethane | Gray | 15 min | 50000 cp (flowable medium) | 2100 psi | 1250 psi aluminum 500-1000 psi most plastics |
||
| Permabond PT321 | Polyurethane | Gray | 1-2 min | 5000 cp (flowable low-medium) | 2900-3600 psi | 900-1200 psi | 70-80 | <10% |
| Permabond PT326 | Polyurethane | Gray | 5 min | 5000 cp (flowable low-medium) | 2300-3600 psi | 900-1200 psi | 65-75 | <15% |
| Permabond PT328 | Polyurethane | Gray | 15-20 min | 5000 cp (flowable low-medium) | 2200-2900 psi | 700-2000 psi | 60-75 | <20% |
| Lord 7100 A/B | Urethane | Black | 5-10 min | 45000 cp (flowable medium) | ||||
| Lord 7150 A/B | Urethane | Gray | 5-10 min | 45000 cp (flowable medium) | ||||
| Lord 7542 A/B | Urethane | Brown | 5 min | 5000 cp (flowable low-medium) | ||||
| Lord 7545 A/B | Urethane | Brown | 5 min | 350,000 cp (Non-Sag Gel) | 3000 psi | 67 | ||
| Lord 7550 A/C | Urethane | Clear/Yellowish | 3-5 min | 5000 cp (flowable low-medium) |
Though no longer available, Araldite® 2041 A/B polyurethane adhesive was a two-part system specifically formulated for bonding plastics including polycarbonate, ABS, nylon and Metton® 1 with minimal substrate preparation. It also performed well when bonding primed metals. Cured Araldite® 2041 A/B polyurethane adhesive featured good environmental stability and impact resistance. It also has been successfully used for bonding painted metals.
Please Note: These cartridges are designed to work best with a 50ml Dispensing dispenser. We advise you use the correct Dispenser to maximize efficiency and minimize waste. If you do not have one, please check out our Dispensers; all are excellent products and have our seal of approval.
If you prefer not to use a Dispenser, there is an option for a manual hand plunger or a caulking dispenser adapter that you can use for fast small jobs.
Features
- Excellent flexibility
- Convenient mix ratio
- Bonds a wide variety of materials
Applications
- Polycarbonate
- ABS
- Nylon
- Metton
- Vulcanized rubber
- Primed metals
Additional information is available by consulting the Technical Data Sheet (TDS). Just ask for it!