Permabond Anaerobic HM128 Threadlocker Adhesive with high strength and environmental resistance
Need Datasheets? Need Accessories?
• Click Here to visit our Datasheet Server (TDS, SDS, Fact Sheets, Selector Guides, etc)• Check out Popular Accessories below by scrolling down just a bit on this page.
Regular price
$ 15.99 USD
3 units available
Volume Discounts
6 units @ $ 15.20 ea, saving 5%
12 units @ $ 14.72 ea, saving 8%
36 units @ $ 14.40 ea, saving 10%
Permabond HM128 Threadlocker Anaerobic Adhesive is a high strength, environmentally friendly adhesive that is used for permanent assembly and prevention of vibration loosening. It fully cures quickly at room temperature to cross-linked plastics, steel, and common bolt platings. It offers corrosion protection, thread lubrication, off-torque control, and environmental resistance.
| Typical Use: | Used to seal and prevent vibration loosening of bolts, studs and cap screws where permanent assembly is required. Permabond HM128 replaces lock washers. |
| Chemical Composition: | Methacrylate esters |
| Color: | Red |
| Components: | 1 part |
| Cure System: | Anaerobic |
| Cure Time: | Full strength: 24h |
| Dielectric Strength: | 11 kV/mm |
| Flash Point: | >93.3 °C |
| Gap Filling: | 0.15 mm |
| Shear Strength: | 2,500 |
| Specific Gravity: | 1.09 |
| Thermal Conductivity: | 0.19 W/mK |
| Viscosity: | 500 |
| Working Time: | 15min |
