HUNTSMAN ARALDITE 2015-1 TOUGHENED EPOXY GEL FOR SMC & GRP (FIBERGLASS) AND BONDING 2 DIFFERENT SURFACES

Posted by MATT JACKSON on

Link URL

https://www.perigeedirect.com/products/huntsman-araldite-2015-toughened-epoxy-gel-for-smc-grp-fiberglass-and-bonding-2-different-surfaces

  

All about Araldite 2015-1 Epoxy Gel Adhesive

One of the most popular adhesive brands, Huntsman is a name that’s widely recognized for providing some of the highest quality gluing products in the market. In this article, we will discuss Araldite 2015-1—a commonly used epoxy gel adhesive by Huntsman and some of its various characteristics and applications.

Application

Particularly suitable for SMC and GRP bonding, Araldite 2015-1 is a semi-clear, two-component, room temperature curing epoxy gel adhesive used to bond a range of materials including metals, fiberglass, rubber, rigid plastic, ceramic, and more. What’s unique is the gel’s capability of providing good bond strength to PTFE/Teflon, as it includes chemical etch-ants, that prepares the PTFE like other separate primer products do. Ideal for use by craftsmen, as well asfor DIY project, Araldite 2015-1—is thixotropic, which means the gel can also be used to fill voids, cracks, and crevices— up to 10 mm (thickness) without sagging.

Properties

Araldite 2015-1 gel offers superior shear and peel strength and toughness that offers great resistance against various elements. Although the adhesive is thixotropic, it also has thick viscosity for vertical applications at the same time. Surfaces can hold on to each other for a much long-long time without any sags.

How to Get the Best for Yourself

Araldite 2015-1 epoxy gel is available in cartridges that works the best with a dispenser. If you don’t have a dispenser, get one. You are highly recommended to use a dispenser for either of these two cartridge sizes: 50ml or 200ml. If you don’t want to use a dispenser, you can get yourself a kit consisting of accessories for your small, DIY projects/.

Key Features

  • Working Time -30 Min (Perfect for Craftsmen, DIY, and Industrial uses)
  • Includes chemical etch-ants, making it uniquely capable to bond to difficult plastics like PTFE/Teflon.
  • High Shear and Peal Strength
  • Toughened Thixotropic Paste (Thick non-sag Gel that will also fill gaps & crevices)
  • Bonds to a wide variety of materials, including metals, plastics and non-metals like SMC & GRP
  • Thick Viscosity for Vertical Applications (yet thixotropic at same time)

Pretreatment

Be it Araldite 2013-1  or  2015-1, proper preparation is extremely important for a durable epoxy bond. Before application, the surfaces should be cleaned properlyto remove all traces of oil, grease, and dirt. Try using a good degreasing agent, such as acetone or any other proprietary degreasing agent.

Create the best bonds with 2015-1 and get your hands on the epoxy gel today!

Author’s Bio – The author is a blogger. This article is about Araldite 2015-1 Epoxy gel Adhesive.


Share this post



← Older Post

×
Welcome Newcomer