Huntsman Araldite 2015-1 Toughened Epoxy Gel for SMC & GRP (fiberglass) and bonding 2 different surfaces
Need Datasheets? Need Accessories?
• Click Here to visit our Datasheet Server (TDS, SDS, Fact Sheets, Selector Guides, etc)• Check out Popular Accessories below by scrolling down just a bit on this page.
Regular price
$ 26.99 USD
240 units available
Please Note: Araldite 2015 in the 200ml cartridges have been discontinued by Huntsman Advanced Materials.
Araldite 2015-1 is a two-part, room temperature curing Epoxy gel adhesive that's high-strength and very tough. It is thixotropic (Thick Gel that is also designed to fill cracks and crevices). It is great for bonding a wide variety of materials like metals, ceramics, glass, rubber, plastics and most other common DIY and shop materials. And it's uniquely capable of providing decent bond strength to PTFE/Teflon, as it includes chemical etch-ants, that prepares the PTFE like other separate primer products do.
2015-1 excels on jobs where two different surfaces need to be bonded (like metal and concrete, wood and plastic, etc.). Work Time: 30 minutes Handling Strength: 4 hours Color: semi-transparent clear Viscosity: Thick Gel thixotropic, so also fills voids, cracks and crevices)
Please Note: These cartridges are designed to work best with a cartridge Dispenser. We advise you use a Dispenser for either of these cartridge sizes: 50ml or 200ml. If you do not have a Dispenser, please check out our Dispensers, all are excellent products and have our 'it's good' seal of approval.
If you prefer not to use a Dispenser, then we recommend considering one of our Kits that include a variety of different accessories that you may need for fast small jobs.
Key Features
- 30 Min Working Time - Perfect for Craftsmen, DIY, and Industrial uses
- Toughened Thixotropic Paste (Thick non-sag Gel that will also fill gaps & crevices)
- Includes chemical etch-ants, making it uniquely capable to decently bond to difficult plastics like PTFE/Teflon.
- High Shear and Peal Strength
- Bonds to wide variety of materials, including Metals, plastics and non-metals like SMC & GRP
- SMC means (Sheet Moulding Compounds, typically FiberGlass sheets) & GRP means (Glass Reinforced Plastics)
- Thick Viscosity for Vertical Applications (yet thixotropic at same time)
Technical Specs
| Part Number | 2015-1 |
| Item Weight | 4 ounces |
| Product Dimensions | 6 x 3 x 1 inches |
| Origin | Made in USA |
| Item model number | 2015 |
| Color | semi clear, translucent |
| Material | Epoxy |
| Item Package Quantity | 1 |
| Number Of Pieces | 1 |
| Maximum Pressure | 2465 PSI |
| Measurement System | metric |
| Special Features | Impact Ready |
| Included Components | Mixing Syringe Included |