TensorGrip P329 CA Compliant Pressure Sensitive Spray Adhesive

TensorGrip P329 CA Compliant Pressure Sensitive Spray Adhesive, 17 oz Can

Need Datasheets? Need Accessories?

• Click Here to visit our Datasheet Server (TDS, SDS, Fact Sheets, Selector Guides, etc)
• Check out Popular Accessories below by scrolling down just a bit on this page.
Condition
SKU: TENSOR_P329_17OZ
$ 10.63 USD
Currently Out of Stock Call for ETA
Currently Out of Stock Place Order and Call for ETA

SKU

  • Type Spray Adhesive
  • Vendor Tensor
  • SKU TENSOR_P329_17OZ
Description Popular Uses, Popular Applications Need Datasheets?

TensorGrip P329 is a low VOC spray adhesive built for aggressive, high tack bonding on foam, fabric, metal, and wood. It is used in furniture assembly, packaging, and general fabrication shops, and it works just as well for a DIY upholstery repair as it does on a production line. One 17 oz can delivers a high build web spray with 100 percent adhesive transfer to the substrate, so less material ends up on the floor and more of it ends up in the bond.

Key Features

  • Low VOC spray adhesive, California Compliant (SCAQMD Rule 1168)
  • Very aggressive, high tack adhesive
  • Single sided application, no need to coat both surfaces
  • High build web spray pattern for even coverage
  • HAPs free formulation
  • 100 percent adhesive transfer to substrate
  • Fully portable aerosol can, no hose or gun required
  • No ODS (ozone depleting substances)

Popular Uses

As a low VOC spray adhesive, TensorGrip P329 is popular for:

  • Foam bonding for cushions and packaging inserts
  • Fabric and upholstery attachment
  • Panel lamination in fabrication and general manufacturing
  • Wood and metal bonding in furniture assembly
  • Quick turn repairs and DIY upholstery projects

Physical Properties

  • Container size: 17 oz aerosol can
  • Component: one component, ready to spray
  • Spray pattern: high build web spray
  • Application tools: standard spray gun (M120), hose (M130), UniJet 110015B tip, or aerosol can direct
  • Country of manufacture: USA

Application Instructions

  1. Shake the can and test the spray pattern on scrap material first.
  2. Apply a single sided coat to one substrate at a high build web spray thickness.
  3. Allow the adhesive to reach tack, then join the substrates and apply firm pressure.

Precautions

FOR INDUSTRIAL USE ONLY. Refer to the SDS prior to use.

Have questions about coverage or substrate compatibility? Call Perigee Direct at (817) 381-9398 or email sales@perigeedirect.com.