Tacbond S5850XM Flammable High Heat Canister Contact Adhesive, Web Spray (30, 140, 300 lb)

Need Datasheets? Need Accessories?

• Click Here to visit our Datasheet Server (TDS, SDS, Fact Sheets, Selector Guides, etc)
• Check out Popular Accessories below by scrolling down just a bit on this page.
Condition
Color
Size
SKU: TACBOND_S5850XM_NATURAL_30LB_CAN
Regular price $ 406.53 USD
Currently Out of Stock Call for ETA
Currently Out of Stock Place Order and Call for ETA

SKU

  • Type Contact Adhesives
  • Vendor Tacbond
  • SKU TACBOND_S5850XM_NATURAL_30LB_CAN

Tacbond S5850XM Flammable High Heat Canister is a non-methylene chloride canister contact adhesive that lays down a soft web spray, dries in 2 to 3 minutes and stays open for 30 to 45 minutes. It is a high solids formula in a portable pressurized canister, so you can spray laminate, particle board, plywood, hardwood, leather, rubber and select metals without a pump or spray pot. Shops and installers use it in industrial, professional and serious Do-It-Yourself work, and the bonded part can be trimmed or routed right after it is rolled down.

Why Choose This Canister Contact Adhesive

  • Non-methylene chloride formula, VHAP free
  • Portable canister system, no pump, compressor or spray pot needed
  • High solids content for more coverage from every canister
  • Soft web spray pattern gives a controlled, even coat
  • Fast 2 to 3 minute dry time keeps assembly moving
  • Long 30 to 45 minute open time for positioning and layup
  • Trim or route immediately after bonding
  • Three colors (Natural, Red and Green) so you can see where you have sprayed

Popular Uses

  • Bonding high pressure laminate to particle board and plywood
  • Countertop and fixture laminating
  • Cabinet, millwork and fixture fabrication
  • Panel and wood composite bonding
  • Leather and rubber bonding
  • Field and jobsite laminating where a spray pot is not practical

Canister Contact Adhesive Physical Properties

  • Type: solvent based contact adhesive, non-methylene chloride, flammable
  • Spray pattern: web
  • Dry time: 2 to 3 minutes
  • Open time: 30 to 45 minutes
  • Colors: Natural, Red, Green
  • Coverage / coat weight: 2.5 to 3.0 dry grams per sq. ft. minimum
  • Recommended coverage on substrate: 80 to 100%
  • Spray distance: 6 to 10 in. (150 to 250 mm)
  • Bonding pressure: 40 to 60 PLI
  • Trim and route: immediately after bonding
  • Full bond strength: 24 to 48 hours
  • Shelf life: 1 year in the unopened container
  • Storage: 60 to 90 F, out of direct sunlight
  • VHAP: free

Compatible Substrates

  • High pressure laminate
  • Particle board
  • Plywood
  • Hardwood
  • Leather
  • Rubber
  • Metal (test first)

Do Not Use On

  • Plasticized vinyl and flexible plastics
  • Expanded or extruded polystyrene foam
  • Polyethylene and polypropylene
  • Copper and copper alloys

Do not run it through spray equipment that has aluminum or copper parts.

Surface Preparation

Both bonding surfaces must be clean, dry and free of dust, dirt and grease.

Application Instructions

  1. Hold the gun 6 to 10 in. from the surface at a 90 degree angle.
  2. Spray an even coat on both surfaces without puddling. Aim for 80 to 100% coverage at 2.5 to 3.0 dry grams per sq. ft.
  3. On porous surfaces and exposed edges, apply a second coat.
  4. Let the adhesive dry until it is tacky and does not transfer to a knuckle, usually 2 to 3 minutes. You have up to 30 to 45 minutes to make the bond.
  5. Position the parts carefully. Contact cement grabs on contact and cannot be slid into place.
  6. Apply 40 to 60 PLI with a nip roller or a 3 in. J-roller.
  7. Trim or route right away. Full bond strength develops in 24 to 48 hours depending on temperature and humidity.

Clean the gun and hose with a citrus cleaner such as CBA689.

Sizes and Colors

  • 30 lb canister: Natural (S5850XM), Green (S5850XMG), Red (S5850XMR)
  • 140 lb canister: Natural, Green, Red
  • 300 lb canister: Natural, Green, Red

Need help picking a size, color or spray setup? Call Perigee Direct at (817) 381-9398 or email sales@perigeedirect.com.

FOR INDUSTRIAL USE ONLY. Refer to the SDS prior to use.