Sil-Flex RTV-7500 Neutral Cure Silicone Sealant (10.3 oz Cartridge)
Need Datasheets? Need Accessories?
• Click Here to visit our Datasheet Server (TDS, SDS, Fact Sheets, Selector Guides, etc)• Check out Popular Accessories below by scrolling down just a bit on this page.
SKU:
SFLX_CCS_RTV7500CLEAR
Regular price
$ 9.65 USD
Currently Out of Stock
Call for ETA
SKU
- Type Silicone
- Vendor Perigee Direct
- SKU SFLX_CCS_RTV7500CLEAR
Sil-Flex RTV-7500 is a one-part, neutral cure, low-modulus silicone adhesive and sealant designed for high-performance sealing and bonding across a wide range of substrates. Engineered for both industrial and construction applications, it cures to form a flexible, rubber-like seal with excellent adhesion, even on challenging surfaces like concrete, PVC, painted metals, and stone.
Its non-bleeding formula makes it a preferred choice for quartzite, marble, and porcelain installations—especially for fabricators concerned with silicone staining. Whether you’re sealing expansion joints or installing countertops, RTV-7500 delivers long-lasting durability, UV resistance, and weatherproof performance in demanding environments.
Key Features & Benefits
Neutral Cure – Safe on sensitive stones like quartzite and marble; prevents staining or bleed-through
Multi-Surface Compatibility – Bonds to PVC, wood, aluminum, concrete, glass, painted surfaces, brick, stone, and more
Excellent Adhesion & Flexibility – ±50% movement capability (ASTM C-719)
Low Odor & Non-Corrosive – Ideal for indoor use and occupied spaces
UV Resistant & Waterproof – Suitable for exterior weather-exposed joints
VOC Compliant – 40 g/L formula meets green building requirements
Non-Flammable & Long Service Life
Non-Bleeding – Ideal for natural stone, as highlighted in our Quartzite Solutions Guide
Common Applications
Countertop installations (stone, quartz, marble, porcelain)
HVAC/R and plumbing penetrations
Data center air intake ductwork (snowmelt drainage)
Roofing and siding joints
Precast and architectural concrete
Appliance trim, industrial gaskets, and marine seals
Kitchen, bath, furnace, and fireplace joints
Interior and exterior caulking, above-grade
Data Center Ductwork
RTV-7500 is used on data center outside air intake ducts in snow country. The intakes pull in snow, it melts inside the duct, and that water can drip onto the electrical equipment below. Contractors run a bead of RTV-7500 along the duct to form a gutter that carries the meltwater out.
The neutral cure won't corrode steel or aluminum duct, and the cured seal stays flexible from -62°F to 400°F. Buying for a data center project? Contact us for case and pallet pricing.
Technical Specifications
| Property | Value | Test Method |
|---|---|---|
| Cure System | Neutral / Oxime | — |
| Movement Capability | ±50% | ASTM C-719 |
| Modulus | Low | ASTM D-412 |
| Cured Texture | Rubber | — |
| Specific Gravity | 1.04 | — |
| Extrusion Rate | 500 g/min @ 50 psi | ASTM C-1183 |
| Temperature Range | -62°F to 400°F | — |
| Intermittent Temp. Max | 450°F | — |
| UV Weathering (10,000 hrs) | No Change | QUV Weatherometer |
| Skin Over Time | 12 minutes | MNA Method |
| Tack-Free Time | 25 minutes | ASTM C-679 |
| Cure Rate | 1/8” per 30 hours | MNA Method |
| Tensile Strength | 190 psi | ASTM D-412 |
| Elongation at Break | 650% | ASTM D-412 |
| Shore A Hardness | 15 | ASTM C-661 |
| Dielectric Strength | 20 kV/mm (500 V/mil) | — |
| Dielectric Constant | 2.7 @ 100 Hz | — |
| VOC Content | 40 g/L | — |
| Shelf Life | 18 months | — |
Compliance & Certifications
ASTM C920 Type S, Grade NS, Class 50
TT-S-00230C, TT-S-01543A
MIL-A-46106A
AAMA 808.3, 805.2, 803.3 (Type I), 802.3 (Type II)
UL Recognized Component
Compatible Substrates
PVC, concrete, glass, aluminum
Painted metals, wood, fiber cement
Brick, stone, ceramic, porcelain, stucco
Building paper, window wrap, steel, masonry
Packaging & Ordering Information
Standard Colors:
Clear, White, Black, Aluminum, Almond, Bronze, Gray, Trans White
(Custom colors available upon request)
Packaging:
10.3 fl oz (305 mL) cartridges. Cases available for volume orders.
Popular Uses
- Sealing stone, quartz, granite, marble, and porcelain countertops
- Installing kitchen and bathroom backsplashes
- Sealing expansion and control joints
- Window and door perimeter sealing
- HVAC ductwork and equipment sealing
- Plumbing pipe penetrations and fixtures
- Roofing flashing and roof penetrations
- Exterior siding and trim joints
- Concrete and masonry crack sealing
- PVC trim and composite trim installation
- Glass and aluminum frame sealing
- Curtain wall and storefront glazing
- Marine cabin and hatch sealing
- Appliance assembly and repair
- Industrial gasket forming
- Equipment enclosure sealing
- Weatherproofing exterior building joints
- Sealing around vents, pipes, and conduit penetrations
- Fiber cement siding installation
- Brick and stone façade sealing
- Fireplace and furnace surround sealing (where appropriate)
- Expansion joints in commercial buildings
- General interior and exterior caulking
- Manufacturing and OEM assembly
- Sign and display fabrication
Visit our datasheet server to download a variety of documents for this formula, as well as for all other formulas and products that Perigee Direct carries.
And especially if you are considering or comparing a few different formulas. Our datasheet server can help you download the necessary data to help u decide and keep your project going.
Click Here to visit our Datasheet Server (TDS, SDS, Fact Sheets, Selector Guides, etc)
And especially if you are considering or comparing a few different formulas. Our datasheet server can help you download the necessary data to help u decide and keep your project going.
Click Here to visit our Datasheet Server (TDS, SDS, Fact Sheets, Selector Guides, etc)