Sia Interface Pads
Need Datasheets? Need Accessories?
• Click Here to visit our Datasheet Server (TDS, SDS, Fact Sheets, Selector Guides, etc)• Check out Popular Accessories below by scrolling down just a bit on this page.
SKU:
SIA_IFPAD_05IN_NOHOLESOFT12IN
Regular price
$ 2.31 USD
Currently Out of Stock
Call for ETA
SKU
- Type Interface Pads
- Vendor Sia Abrasives
- SKU SIA_IFPAD_05IN_NOHOLESOFT12IN
Description
Sia interface pads add a layer of cushioning between the sander's backup pad and the sanding disc, letting the disc flex over contoured, curved, or uneven surfaces without digging in. Available in 5 inch and 6 inch diameters in soft and firm densities, with hole and no-hole patterns to match disc type and dust extraction needs.
Product Name
Sia Interface Pads
Brief Description
A cushioning layer that mounts between a random-orbit sander's backup pad and the abrasive disc, in 5 in. and 6 in. sizes with firm, soft, and multi-hole vacuum options. It lets the disc flex into contours and curves that a rigid backup pad alone cannot follow.
Popular Applications & Uses
- Contour sanding on rounded panels, body lines, and moldings
- Cushioning aggressive discs to prevent gouging on soft or curved substrates
- Extending backup pad life by absorbing wear between the pad and the disc
- Feathering and blending work on composite and metal panels with irregular shapes
- Fine finish sanding where a firm backup pad would leave flat spots or swirl marks
Industries that Commonly Use It
- Aerospace/Defense
- Automotive Service/Repair
- Cabinet & Woodworking
- Fabrication
- Furniture
- General Manufacturing
- Industrial Supply
- Maintenance & Repair
- Marine
- Metal Fabrication
- Transportation/ Specialty Vehicle
Special and Unique Features
- Foam interface layer flexes to follow curved and contoured surfaces that a rigid backup pad cannot reach evenly
- Firm and soft durometer options tune the cushioning to either aggressive leveling or delicate finish passes
- Vacuum-hole versions (e.g. 10-hole, 3-hole) keep dust extraction working through the added layer
- Hook-and-loop faces on both sides let it drop between an existing pad and disc with no tool changes
Key Properties
- Construction: foam interface pad, hook-and-loop faces both sides
- Available diameters: 5 in. and 6 in.
- Durometer options: firm and soft
- Hole patterns: no-hole and multi-hole (vacuum) versions available
Surface Compatibility
- Used between sander backup pads and abrasive discs on composite, metal, and wood substrates
- Common on curved automotive panels, boat hulls, and furniture components
- Not a cutting surface; compatibility follows whatever disc and substrate are mounted
Known backups / known substitutes
No verified cross-reference substitute documented. Chemical Concepts stocks this family under SIA0020.5886, SIA5999.0515, SIA8795.1389, SIA9010.9873, and SIA9344.2867 SKUs, split by diameter, durometer, and hole pattern.
Comparison Note
Unlike a backup pad, which sets the base sanding feel, an interface pad is an add-on cushioning layer used on top of the backup pad specifically for contour and curved-surface work; skip it for flat-panel sanding where a standard backup pad alone is enough.
Visit our datasheet server to download a variety of documents for this formula, as well as for all other formulas and products that Perigee Direct carries.
And especially if you are considering or comparing a few different formulas. Our datasheet server can help you download the necessary data to help u decide and keep your project going.
Click Here to visit our Datasheet Server (TDS, SDS, Fact Sheets, Selector Guides, etc)
And especially if you are considering or comparing a few different formulas. Our datasheet server can help you download the necessary data to help u decide and keep your project going.
Click Here to visit our Datasheet Server (TDS, SDS, Fact Sheets, Selector Guides, etc)