SciGrip SG200 High Strength Toughened 10, 20 & 40 min Off-White White 490ml 10:1 MMA Methacrylate Adhesive
Need Datasheets? Need Accessories?
• Click Here to visit our Datasheet Server (TDS, SDS, Fact Sheets, Selector Guides, etc)• Check out Popular Accessories below by scrolling down just a bit on this page.
Regular price
$ 74.99 USD
Call for ETA
| Discounts by Volume | % Off | Unit Price |
|---|---|---|
12 + Case Pricing | 5% | $ 71.24 |
36 + | 10% | $ 67.49 |
108 + | 15% | $ 63.74 |
SCIGRIP® SG200 Series Methacrylate Adhesives are two-component, 10:1 mix ratio products for bonding composites, thermoplastics1, metals2 and combinations thereof. Minimal surface preparation1, 2 combined with a choice of 10, 20 and 40 minute working times, provide reduced labor and production cycle time. These products are widely used for marine, transportation and general plastic bonding applications. Packaging options include 490 ml cartridges and 5 and 50 gallon (19 and 189 liters) in bulk containers for application with meter-mix dispense equipment.
Features & Benefits
- Choice of 10, 20, and 40 minute working times
- Outstanding sag resistance for application on non-level surfaces
- Excellent environmental and chemical resistance
- Minimal surface preparation, however metals require primer
SPECIFICATIONS & AVAILABILITY
Working Times
|
Adhesive
|
Gap Fill
Inch (mm) |
Working Time
min. |
Fixture Time
|
|---|---|---|---|
|
SG200-10
|
0.02-0.5
(0.50-12.7) |
8-12
|
25-30
|
|
SG200-20
|
0.02-0.5
(0.50-12.7) |
17-22
|
35-42
|
|
SG200-40
|
0.02-0.5
(0.50-12.7) |
35-45
|
80-90
|
Typical Physical Properties
|
Adhesive
|
Ratio A:B
Volume Weight |
|
|
|---|---|---|---|
|
SG200-10
|
10:1
|
|
|
|
SG200-20
|
10:1
|
|
|
|
SG200-40
|
10:1
|
|
|
