Permabond MS359 Grey & Clear MS Polymer Medium Set 10 - 20 min Cartridge Non-Sag and Starter Kits PerigeeDirect
Permabond MS359 Grey & Clear MS Polymer Medium Set 10 - 20 min Cartridge Non-Sag and Starter Kits PerigeeDirect
Permabond MS359 Grey & Clear MS Polymer Medium Set 10 - 20 min Cartridge Non-Sag and Starter Kits PerigeeDirect
Permabond MS359 Grey & Clear MS Polymer Medium Set 10 - 20 min Cartridge Non-Sag and Starter Kits PerigeeDirect
Permabond MS359 Grey & Clear MS Polymer Medium Set 10 - 20 min Cartridge Non-Sag and Starter Kits PerigeeDirect
Permabond MS359 Grey & Clear MS Polymer Medium Set 10 - 20 min Cartridge Non-Sag and Starter Kits PerigeeDirect
Permabond MS359 Grey & Clear MS Polymer Medium Set 10 - 20 min Cartridge Non-Sag and Starter Kits PerigeeDirect
Permabond MS359 Grey & Clear MS Polymer Medium Set 10 - 20 min Cartridge Non-Sag and Starter Kits PerigeeDirect

Permabond MS359 Grey & Clear MS Polymer Medium Set 10 - 20 min Cartridge (Non-Sag) and Starter Kits

Need Datasheets? Need Accessories?

• Click Here to visit our Datasheet Server (TDS, SDS, Fact Sheets, Selector Guides, etc)
• Check out Popular Accessories below by scrolling down just a bit on this page.
Color
Select the Kit needed
SKU: PBND_MS359_CLEAR_290ML
$ 35.99 USD
5 units available
5 units are available

SKU

  • Type MS Polymer (Modified Silicone)
  • Vendor Permabond
  • SKU PBND_MS359_CLEAR_290ML
Description Popular Uses, Popular Applications Need Datasheets?

Take control of vertical bonding and gap filling with Permabond MS359. This high-performance MS Polymer adhesive features a non-sag, paste-like consistency that stays exactly where you apply it, making it ideal for overhead and vertical applications. It cures to a tough, permanently flexible bond with excellent weather resistance, adhesion to diverse substrates like metal, glass, and wood, and a convenient 10-20 minute set time—all without the need for primers or solvents

Permabond MS Polymers are single component, hybrid technology adhesives that moisture cure at ambient temperature. The high elongation and flexible nature of these strong bonds meet the demands of stress from impact, peel and expansion that can occur when bonding dissimilar materials. They have excellent environmental resistance and remain very flexible.

PERMABOND MS359 GREY and CLEAR are two formulas that perform similarly.  Both are single-part, room temperature curing MS polymer adhesive. They are ideal for use on a wide variety of substrate materials including metals, plastics and composites. And are ideal for exterior construction applications (e.g. frames and fascias) as it has excellent resistance to weathering.

This product differs from the MS359 A 290ML. This product is thick gel/paste and non-sag  non-drip, whereas the MS359A low viscosity and self-leveling. If you would prefer self-leveling, please visit the MS359A product page.

Features & Benefits

  • Non-Sag, Non-Drip
  • Thick Gel, Paste Consistency
  • 1,500,000 to 1,500,000 cP Viscosity
  • Free from solvents, isocyanates, silicones and PVC compounds, non-corrosive
  • Cures at room temperature
  • Set time 10 - 20 min
  • Time to handling strength about 1-2 hours
  • Full Cure in 24 hours
  • No mixing required, cures by moisture in the atmosphere, in the air.
  • Can be painted after curing
  • Suitable for a variety of substrates
  • Primer free
  • Easy to apply
  • Versatile – weather resistant

Compatible Surfaces

  • Steel: 2-3 MPa (290-440psi)
  • Aluminium: 2-3 MPa (290-440psi)
  • Zinc: 2-3 MPa (290-440psi)
  • PVC: 2-3 MPa (290-440psi)
  • Polycarbonate: 1-1.5 MPa (150-220psi)
  • Polystyrene: 1-1.5 MPa (150-220psi)
  • Wood: 2-3 MPa (290-440psi)
  • Most Fabrics
  • All woods
  • All metals
  • Epoxy finishes
  • All Hard Plastics (like ABS, PVC, Acetal, etc)
  • Not compatible with soft, rubbery, or polyolefins like (PP, HDPE, PE, LDPE, UHMW)