PERMABOND ET500 Mixing Ratio 1:1 Fast set 3 - 4 min Cure Two Component Epoxy Clear Cartridges & Accessories

SKU: PBND_ET500_050ML

Need Datasheets? Need Accessories?

• Click Here to visit our Datasheet Server (TDS, SDS, Fact Sheets, Selector Guides, etc)
• Check out Popular Accessories below by scrolling down just a bit on this page.
Size
Select the Kit needed
Regular price $ 19.99 USD
($ 0.39 USD per Milliliter)
3 units available

Volume Discounts

6 units @ $ 19.00 ea, saving 5%

12 units @ $ 18.40 ea, saving 8%

36 units @ $ 18.00 ea, saving 10%

Add Mixing Nozzles for the 50ml & 41.5ml "Gray-Cap" Cartridges
Add Mixing Nozzles for the Larger Cartridges (200ml to 1500ml)
Add Dispensers for 50ml & Similar Sized Smaller Cartridges
_io_Add Dispensers for 400ml Cartridges
Add Bond Performance Enhancers
Add Needed Documents
3 units are available

Want a Delivery Estimate?

SKU

  • SKU PBND_ET500_050ML

PERMABOND ET500 is a two-part fast-setting epoxy adhesive which bonds to a wide variety of substrates such as wood, metal, ceramics and some plastics and composites. It cures rapidly at room temperature to give handling strength in approximately 5 minutes. This product is ideal for general purpose bonding. It is typically used for small component assembly and is suitable for applications that require a clear bond line.

Benefits

  • High peel strength increases design versatility
  • 1:1 mix ratio of most Permabond 2-component epoxies reduces equipment costs
  • Set time 3 - 4 min
  • Durability increases material choices
  • Rapid cure increases production rates
  • Room temperature cure reduces equipment & energy costs
  • Solvent free improves workplace safety
  • Low odour improves workplace environment

Physical Properties of Uncured Adhesive

ET500A

ET500B

Chemical composition

Epoxy Resin

Amine Hardener

Appearance

Colourless

Colourless

Viscosity @ 25°C

12,000-18,000 mPa.s (cP)

15,000-30,000 mPa.s (cP)

Specific gravity

1.2

1.1

Typical Curing Properties

Mix ratio by volume

1:1

Maximum gap fill

2 mm 0.08 in

Usable / pot life @23°C

3-4 mins

Handling time @23°C

5-8 mins

Working strength @23°C

30-60 mins

Full cure @23°C

24 hours