Permabond Anaerobic HM128 Threadlocker Adhesive with high strength and environmental resistance

Permabond

SKU: PBND_HM128_10ML_BTL

  • $ 261.30
    Will be in stock after


    Permabond HM128 Threadlocker Anaerobic Adhesive is a high strength, environmentally friendly adhesive that is used for permanent assembly and prevention of vibration loosening. It fully cures quickly at room temperature to cross-linked plastics, steel, and common bolt platings. It offers corrosion protection, thread lubrication, off-torque control, and environmental resistance. 

    Typical Use: Used to seal and prevent vibration loosening of bolts, studs and cap screws where permanent assembly is required. Permabond HM128 replaces lock washers.
    Chemical Composition: Methacrylate esters
    Color: Red
    Components: 1 part
    Cure System: Anaerobic
    Cure Time: Full strength: 24h
    Dielectric Strength: 11 kV/mm
    Flash Point: >93.3 °C
    Gap Filling: 0.15 mm
    Shear Strength: 2,500
    Specific Gravity: 1.09
    Thermal Conductivity: 0.19 W/mK
    Viscosity: 500
    Working Time: 15min
    ×
    Welcome Newcomer