Permabond 3D30 cyanoacrylate Instant Adhesive-Low Odour, low bloom 3D print infiltrant
Need Datasheets? Need Accessories?
• Click Here to visit our Datasheet Server (TDS, SDS, Fact Sheets, Selector Guides, etc)• Check out Popular Accessories below by scrolling down just a bit on this page.
Regular price
$ 31.99 USD
Call for ETA
| Discounts by Volume | % Off | Unit Price |
|---|---|---|
12 + | 5% | $ 30.39 |
36 + Most Popular | 8% | $ 29.43 |
60 + | 12% | $ 28.15 |
PERMABOND® 3D Series are low odor, low bloom 3D print infiltrants for toughening 3D printed parts. The full range of products allow the ideal features for each application.
Features & Benefits
- Single component - no mixing required
- Low odour – ideal for use in dip baths
- Solvent-free - to minimise workplace hazard
- Adds strength and improves printed part durability
- Moisture cure mechanism
- No curing equipment required
- Fills porosities
- Easy to apply either as “on the spot” coating or in a dip bath
- For use on simple or complex, small or large parts
- Clear, colourless appearance
- Tack-free finish
- 100% reactive, no solvents
- Parts can be bonded, sanded or painted after infiltration
|
Chemical composition |
Alkoxyethyl cyanoacrylate |
|
Appearance |
Colourless |
|
Specific gravity |
1.1 |
|
Temperature resistance |
-55 to +82°C (-65 to +180°F) |
|
Speed |
Fast Cure |
|
Surface |
High Gloss Surface |
|
Features |
Crystal Clear High Gloss Product Provides Brilliant Colour Vibrancy |
|
Viscosity |
Medium Low 90-110 mPa.s cPs |
|
Tensile Strength* |
10 N/mm² (1400 psi) |
