MixPac 400ml F-System 1:1 Ratio (13.2oz) Empty 2-Part Cartridges (AF 400-01-10-01 (112410)) with included Pistons & Sealing Caps
Need Datasheets? Need Accessories?
• Click Here to visit our Datasheet Server (TDS, SDS, Fact Sheets, Selector Guides, etc)• Check out Popular Accessories below by scrolling down just a bit on this page.
Regular price
$ 5.49 USD
630 units available
MedMix MixPac F-system 400ml 1:1 Ratio (13.2oz) 2-Part (dual-component) 1:1 ratio 400ml empty Adhesive Cartridge, with included Resealable Cap and Sealing Pistons.
MedMix MixPac Cartridge Part Numbers:
AF 400-01-10-01 (#112410)
Available in 2 kit packages, plus Accessories:
- Empty Cartridges and Pistons
- Starter Kit with dispenser
- Useful Accessories
About the Cartridges:
These cartridges include matching pistons and a re-sealable cap. They are ready for filling with material, storing and dispensing. These 2-Part cartridges are industrial grade and silicone free. The cartridge design/fit using the "F-System", and are manufactured by Sulzer MixPac, the industry leader in 2-part fluid packaging and dispensing.
These 2-Part Cartridges are industrial grade, silicone free, and rated up to 100psi sustained pressure. The Cartridge design/fit using the industrial standard "F-System" template. The 2-Part design keeps the two adhesive parts separate, until a separate mixing Nozzle is attached, where the two parts are pushed or extruded into the mixing Nozzle and bonding or curing begins.
These cartridges are perfect for storing and applying bulk adhesives that use a 1:1 mix ratio, where precise metering and mixing is needed.
About the Starter Kits:
Each Starter Kit includes either 5, 10, 25, 50, or 100 cartridges, related sealing pistons and cartridge caps, mixing nozzles (MFH 08-18T, or similar, nozzle for each cartridge in your kit), and one Maven MV_400-36X dispenser.
We recommend checking out our Starter Kits to get set up and running. Or if you prefer getting the dispenser separately, check out the Maven MV_400-36X dispenser, which will enable you to dispense the adhesives out of these cartridge kits.
|
Total Cartridge Length (bottom to cap tip |
8 7/8 inches |
|
Barrel length |
7 1/4 inches |
|
Total cartridge width (across both barrels) |
3 5/8 inches |
|
Barrel Inner Diameter (1:1 ratio so both sides are same) |
1.555 inches |
|
Mixer Style |
F-System dedicate MFQ for Quadro/Square style or MFH for Helix style |
|
Total Cartridge Volume (both barrels combined) |
400ml , or 13.2oz |
NOTE: Additional accessories needed. Consider the pre-configured starter kits, or view the accessories scroll-bar below to ensure you get what you need. For example, with these empty cartridges you will also need mixing nozzles and a dispensing product to push/extrude/dispense the adhesive out. We recommend also getting one of our 400ml Dispensers, which will enable you to dispense the adhesives out of these cartridge kits. The mixing nozzles needed are of the F-system design, which easily twist on and off the cartridge end. These nozzles tend to be difficult to clean and store after their first use, and therefore generally considered to be single-use accessories. These Cartridges use standard static mixer nozzles. Products are industrial grade safe to 100 psi and are certified silicone free. Dispensers are available for all size cartridges either in manual of pneumatic. The “F” System is comprised of a small lightweight, hand-held manual dispenser which dispenses 2-component adhesives through “F” System cartridges and mixers. Cartridge systems are available in a variety of volumetric ratios. Please be sure to select the correct ratio for your two component system.