Maven Solid Surface Countertop Bonder - Epoxy-Acrylic Hybrid Adhesive - Multiple Colors - Medium Set 10-15 minutes
maven Solid Surface & Countertop Adhesive Bonder is a two-part MMA acrylic adhesive designed in the industry-standard 10 to 1 cartridge system, and available in a variety of popular colors. DAl surface adhesive is specially formulated for seaming and edging all popular solid surface materials: Corion, granite, quartz, quartzite, marble, wood, tile, stone, concrete, slate, soapstone, glass, steel, stainless steel, ceramic, porcelain, hard plastics, decorative laminates, and other countertops materials.
This product gives the fabricator an excellent NON-DRIP non-sagging product with unsurpassed adhesion, consistent cure and high bond strength.
The product has excellent UV stablility and inherently non-yellowing over time. It comes in a variety of colors (more than 20 color options, as well as custom color matching ability It does not need surface preparation or primer/priming.
Set time (working time) 10-15 minutes
Handling strength in less than 30 minutes
Mixed Viscosity: Thixotropic, Thick Gel
Please Note: These cartridges are designed to work best with a 50ml or 250ml cartridge 10:1 ratio Dispenser. We advise you use a 50ml or 250ml 10:1 ratio dispenser for all respective uses. If you do not have one, please check out our 10:1 ratio Dispensers, all are excellent products and have our 'it's good' seal of approval.
If you prefer not to use a Dispenser, we have some 50ml kits that include hand tools as pictured, that you can use for fast small jobs. But the 250ml 10:1 ratio cartridges really need to use a 250ml 10:1 ratio Dispenser, they're just too big to effectively use without the dispenser.
- 10-15 Min Working Time (10 gm mass)
- Fast-Set MMA for most all countertop and solid-surface materials.
- Craftsman and Industrial uses
- Excellent strength and stiffness
- Excellent UV Resistance and Non-Yellowing performance over time
- Gap filling 0.75mm-3.0mm (.03in-.12in)
- Resistant to hydrocarbons, acids and bases. Susceptible to polar solvents.
- Operating temp: -50F to 250F (-45C to 121C)
Tensile Strength: 3200-4500 psi
Lap Shear Strength, psi: 2800-3800
Modulus, psi: 130,000-175,000
Chemical resistance: Excellent resistant to hydrocarbons, acids and bases; susceptible to polar solvents.
Directions of applications
Wipe off and degrease the surface to be bonded. Use eye protection and gloves to avoid skin contact. Dispense a desirable amount of adhesive using a dispensing dispenser. The nozzle sizes can be selected according to the desired bond thickness. Join the substrates with the specified work-life of this material and allow it to cure at room temperature. Do not disturb the parts during the curing process. Excess adhesive can be wiped off.
Safety and handling
Wear eye protection and gloves. Harmful if swallowed. Keep it away from heat, flames. Keep out of reach of children. Once used keep the containers closed.
Storage and shelf life
Store this product in a tightly closed container in a cool and well-ventilated area. Product should not be frozen. Keep it away from any source of heat. Store the material in between 51℉ to 75℉. Continuous exposure above 75℉ will reduce the shelf life.