Maven Epoxy & MMA Adhesive Remover – 4 oz Can
Need Datasheets? Need Accessories?
• Click Here to visit our Datasheet Server (TDS, SDS, Fact Sheets, Selector Guides, etc)• Check out Popular Accessories below by scrolling down just a bit on this page.
Regular price
$ 24.99 USD
18 units available
Maven Epoxy & MMA Adhesive Remover is a methylene chloride free formula that softens cured epoxy and methyl methacrylate (MMA) adhesive so the softened material can be wiped away. Use it for cured adhesive cleanup with a simple brush-on, wait, and wipe process. Repeat applications until the adhesive is removed.
Surface warning: This remover will damage soft plastics and remove paint. Do not use on soft plastic parts or painted surfaces where the finish must be preserved. Always test a small, hidden area before treating the full surface.
Package size: Sold only as one 4 oz can.
Key Features
- Methylene chloride free formula.
- Designed for removing cured epoxy and MMA adhesive.
- Brush-on application for targeted adhesive cleanup.
- Allow 5–10 minutes for the cured adhesive to soften before wiping.
- Repeat the process as needed to remove remaining adhesive.
- Made in America.
Directions for Use
- Prepare: Read all label directions and warnings. Wear chemical-resistant gloves and eye protection. Avoid skin contact. Use only outdoors or with adequate ventilation; do not use in enclosed spaces.
- Test first: Apply to a small, hidden area to check for damage to the underlying surface or finish.
- Brush on: Apply the remover directly over the cured epoxy or MMA adhesive using a brush.
- Wait: Allow 5–10 minutes for the adhesive to soften.
- Wipe away: Wipe away the softened adhesive.
- Repeat: Reapply, wait, and wipe as needed until all adhesive is removed.
Surface Compatibility & Limitations
Intended for cured epoxy and MMA adhesive removal. The underlying surface must tolerate the remover. It will damage soft plastics and remove paint. A successful spot test is required before use; suitability for other surfaces or finishes is not guaranteed.
Product Specifications
| Package size | One 4 oz can |
|---|---|
| Methylene chloride | Free of methylene chloride |
| Physical form | Opaque, viscous liquid with aromatic odor |
| Flash point | 72°F (22.2°C), closed cup |
| Viscosity | 1,000–3,000 cP (supplied SDS) |
| Brand | Maven |
| Product type | Epoxy & MMA adhesive remover |
| Primary use | Cured adhesive cleanup |
| Application method | Brush onto cured adhesive |
| Wait time per application | 5–10 minutes, until adhesive has softened |
| Removal method | Wipe away softened adhesive; repeat as needed |
| Surface limitations | Damages soft plastics and removes paint |
| Country of manufacture | United States |
Safety & Storage
DANGER: Highly flammable liquid and vapor. Harmful if inhaled. Causes skin and serious eye irritation. Causes organ damage; prolonged or repeated exposure may cause organ damage. Keep away from heat, sparks, and flames. No smoking. Do not breathe vapors. Wear protective gloves and eye protection.
Store tightly closed in a cool, ventilated, locked location. Keep out of reach of children. Follow the product label for first aid and disposal instructions. If exposed, call a poison center or doctor immediately. U.S. Poison Control: 1-800-222-1222.