LORD 310-A/310-B Epoxy Adhesive Slow Set 30-60 min With Chemical Resistant Light-Resistant Thixotropic Thick Gel for Rubber, Plastics, Urethanes, Metals
ORD 310A-B Epoxy Adhesive is a two component, thixotropic epoxy system that is used for bonding rubber, plastics, urethanes, and metals. It is typically used for automotive body panels, bond disk drives, vibration damping mounts, and down-hole oil field equipment. It has low shrinkage, durability, and is resistant to sunlight, moisture, temperature, oils, solvents, and dilute acids. Working time is 30-60 min.
Available in Gray or Black colors
Gray
50ml 3003578
210ml 3031527
300ml 3020264 (Discontinued)
1-Pint Kit (1/2 pint parts a & b) 3003582 & 3003589 (Discontinued)
2-Quart Kit (1 quart parts a & b) 3003584 & 3003592 (Discontinued)
2-Gallon Kit (1 gallon parts a & b) 3003583 & 3003591 (Discontinued)
10-Gallon (85-pound kit) (5 gallons each part) 3003585 & 3003593
Black
600ml 3003581 (Dsicontinued)
2-Gallon Kit (1 gallon parts a & b) 3003583 & 3003594 (Discontinued)
10-Gallon (85-pound kit) (5 gallons each part) 3003585 & 3003596
Key Stats
| Typical Use: | High-strength epoxy adhesive for SMC, FRP and general purpose bonding. Flexible cure rates, uniform contact between substrates, low shrinkage and good creep properties. |
| Chemical Composition: | Epoxy |
| Color: | Gray |
| Components: | 2 part |
| Cure System: | Room Temperature |
| Cure Time: | 24h @ >= 18 °C |
| Elongation: | 2% |
| Flash Point: | >93 °C |
| Mix Ratio: | 1:1 by volume; 1.15:1 by weight @ -40 to 204 °C |
| Service Temperature: | -40 to 204 °C |
| Tensile Strength: | 4,650 psi |
| Viscosity: | Resin: 400,000 to 820,000; Hardener: 230,000 to 690,000 |
| Working Time: | 30 to 60min @ 24 °C |