Loctite Epoxy Quick Set – 5-Minute Two-Part Epoxy
Need Datasheets? Need Accessories?
• Click Here to visit our Datasheet Server (TDS, SDS, Fact Sheets, Selector Guides, etc)• Check out Popular Accessories below by scrolling down just a bit on this page.
Regular price
$ 6.99 USD
Call for ETA
Loctite Epoxy Quick Set is a fast-setting, two-part epoxy for durable household, workshop, and general repair projects. The convenient dual syringe dispenses resin and hardener in equal amounts for a consistent 1:1 mix. Once mixed, the epoxy forms a tough, rigid, non-shrinking bond and can also be used for gap filling, surface repair, and laminating.
This 5-minute epoxy bonds metal, glass, ceramic, china, wood, tile, fiberglass, concrete, stone, and many rigid plastics. After curing, it is water resistant, resistant to most common solvents, and can be sanded, drilled, or machined for a finished repair.
Key Benefits
- Sets in approximately 5 minutes for fast repairs
- Dual syringe dispenses equal parts resin and hardener
- Develops usable strength in 1 hour and fully cures in 24 hours
- Non-shrinking formula will not shrink or expand while curing
- Water resistant and resistant to most common solvents after full cure
- Cured epoxy can be sanded, drilled, and machined
- Can be tinted with earth pigments, cement, or sand for color matching
Recommended Uses
- Repairing broken metal, wood, glass, ceramic, china, and tile items
- Bonding many rigid plastics, fiberglass, concrete, and stone
- Filling small gaps, chips, and damaged areas
- Laminating materials and reinforcing repairs with fiberglass cloth
- Fast household, hobby, workshop, and maintenance repairs
Product Specifications
| Manufacturer Item Number | 1395391 |
|---|---|
| Package Size | 0.85 fl oz (25 mL) carded dual syringe |
| Chemistry | Epoxy resin with polymercaptan hardener |
| Mix Ratio | 1:1 by volume |
| Cured Color | Clear amber / translucent yellow |
| Application Temperature | 39°F to 95°F (4°C to 35°C) |
| Gel Time | 4 to 10 minutes |
| Set Time | Approximately 5 minutes |
| Usable Strength | 1 hour |
| Full Cure | 24 hours |
| Tensile Shear Strength | 3,437 ± 58 psi on sandblasted cold-rolled steel after a 24-hour cure |
| Hardness | 80 ± 1 Shore D |
| Continuous Service Temperature | -10°F to 120°F (-23°C to 49°C) |
| Short-Term Service Temperature | -10°F to 302°F (-23°C to 150°C) |
| Shelf Life | 24 months from date of manufacture when unopened |
| Paintable | No; cured epoxy may be tinted with earth pigments, cement, or sand |
How to Use
- Make sure both surfaces are clean, dry, and free of oil, wax, paint, rust, and other contaminants. Roughen smooth surfaces for improved adhesion.
- Dispense equal amounts of resin and hardener onto a disposable surface.
- Mix thoroughly for about 1 minute.
- Apply a small amount to both surfaces within 1 to 2 minutes of mixing, then join the parts.
- Support the assembly for approximately 10 minutes at room temperature. Usable strength is reached in about 1 hour; allow 24 hours for full cure.
- Wipe the syringe tips clean, retract the piston slightly, and replace the plug in the same orientation.
Important Limitations
- Not recommended for polyethylene, polypropylene, non-stick coatings, nylon, or flexible materials.
- Not recommended for prolonged water immersion or continuously wet applications.
- Not for use on potable-water systems.
- Not suitable for short-term heat exposure above 302°F (150°C).
- Application and cure times vary with temperature, humidity, and the thickness of the applied epoxy.
Safety: Apply and cure in a well-ventilated area, wear gloves, and wash hands after use. Review the product label and Safety Data Sheet before use.