Loctite Epoxy Plastic Bonder 1360788 – Rigid Plastic Repair
Need Datasheets? Need Accessories?
• Click Here to visit our Datasheet Server (TDS, SDS, Fact Sheets, Selector Guides, etc)• Check out Popular Accessories below by scrolling down just a bit on this page.
Regular price
$ 6.99 USD
Call for ETA
Repair rigid plastic parts with Loctite Epoxy Plastic, a two-part adhesive in an equal-dispensing dual syringe. It fills gaps, resists water and common solvents, and can be sanded or drilled after cure.
Key Benefits
- For ABS, PVC, fiberglass and other compatible hard plastics.
- Non-shrinking adhesive and filler for surface repairs.
- Convenient 1:1 mixing by volume.
Product Specifications
| Manufacturer item | 1360788 |
|---|---|
| Package | 25 mL dual syringe (0.85 fl. oz.) |
| Chemistry | Epoxy resin / polymercaptan hardener |
| Cured color | Translucent yellow |
| Gel time | 4–10 minutes; temperature, humidity and thickness dependent |
| Usable strength / full cure | 1 hour / 24 hours; conditions dependent |
| Application temperature | 39–95°F (4–35°C) |
| Service temperature | Long term: -10–120°F (-23–49°C); short term: up to 302°F (150°C) |
Application & Limitations
Clean, dry and roughen surfaces. Mix equal volumes thoroughly for about one minute; apply within one or two minutes and support the joint for at least ten minutes. Allow full cure before service. Not recommended for polyethylene, polypropylene, nylon, flexible materials or non-stick surfaces. Avoid continuous immersion, continuously wet locations and potable-water systems. Not paintable. Use ventilation, gloves and eye protection; follow package precautions and both component safety data sheets.