GLYPTAL 1201 Red Insulating Enamel – Electrical Insulation, Sealer and Protective Coating

GLYPTAL® 1201 Red Insulating Enamel is a versatile industrial coating developed to insulate, seal and protect electrical components, metal surfaces and industrial equipment. Its durable, low-gloss red film adheres to materials including metal, ceramic, porcelain, concrete, fiber and wood.

Originally designed for coating electrical coils and armatures, GLYPTAL 1201 also provides dependable protection against moisture, corrosion, oil, salt water, mild acids, heat, dust and abrasion. It can be used as an electrical insulating coating, industrial primer, protective finish, concrete sealer, gasket adhesive or thread sealer.

The enamel is supplied ready for brush application and may be thinned appropriately for spraying. It becomes dust-free in approximately 30 minutes and can be handled after approximately two hours under typical conditions.

Key Features

• Provides electrical insulation and environmental protection

• Rated dielectric strength of 1,500 volts per mil when dry

• Withstands continuous temperatures up to 135°C (275°F)

• Excellent transformer-oil resistance

• Good resistance to water, salt water and acids

• Flexible film helps resist cracking, impact and abrasion

• Strong adhesion to metal, ceramic, porcelain, concrete, fiber and wood

• Air dries at room temperature or may be baked for a smooth finish

• Suitable for brushing or properly thinned spray application

• Meets the requirements of MIL-E-22118

Popular Applications

GLYPTAL 1201 may be used for:

• Insulating electrical coils and armatures

• Coating motor, generator and transformer housings

• Protecting electrical and industrial components from moisture

• Priming structural iron and steel

• Sealing concrete floors

• General plant and machinery maintenance

• Protecting winches and outdoor equipment against corrosion

• Coating the interiors of hydraulic tanks and bearing cases

• Sealing pipe and stud threads

• Sealing vacuum-system components

• Bonding or sealing gaskets

• Protecting thermostat, water-cooler and truck-control components

Item Specifications

Drying times are typical values and may vary with film thickness, temperature, ventilation and humidity.

Application Information

Surfaces should be clean, dry and free of oil, dust, rust and other contaminants before application. Apply by brush as supplied or thin with an appropriate compatible solvent when preparing the coating for spray application. When multiple coats are required, allow adequate drying time between applications.

Test the product on the intended substrate and under actual service conditions before beginning a full production application.

Safety and Handling

GLYPTAL 1201 is a highly flammable solvent-based coating. Use it only outdoors or in a well-ventilated work area and keep it away from heat, sparks, open flames and other ignition sources. Wear appropriate gloves, protective clothing and eye protection. Avoid breathing vapors or spray mist and consult the current Safety Data Sheet before use, storage, transportation or disposal.