Chem-Set™ 605 Quick Set Acrylic Adhesive
Need Datasheets? Need Accessories?
• Click Here to visit our Datasheet Server (TDS, SDS, Fact Sheets, Selector Guides, etc)• Check out Popular Accessories below by scrolling down just a bit on this page.
Regular price
$ 17.76 USD
Call for ETA
Description
ChemSet 605 Quick Set Acrylic Adhesive is a toughened structural adhesive that after curing, produces superior strength load-bearing bonds to engineered plastics including undermount sink anchors for solid surface, engineered stone and quartz. ChemSet 605 also bonds to PVC, fiberglass, ABS, FRT, PPO, PCBB, Metton®, Lomod®, Valox®, Noryl®, GTX, Minlon®, epoxy, RIM urethane, wood, poorly prepared surfaces, and where outdoor weathering or solvent exposure is anticipated.
Applications
Chem-Set 605 Quick Set Acrylic Adhesive is an ideal solution for many countertop fabrication projects using non-porous solid surfaces. Its superior bond strength and fast cure times handle undermount sinks and other fixtures with ease.
Features:
- Minimal surface preparation
- Room temperature cure
- 1:1 mix ratio
- Rapid fixture in thin set
- Non-sagging formula
Physical Properties (Uncured):
| Color | White or Clear |
| Working Time | 2-3 min. @ 72° F |
| Fixture Time | 8-10 min. @ 72° F |
| Functional Cure | 3/4 – 1 hr @ 72° F |
| Full Cure | 24 hrs. |
| Mix Ratio by Volume | 1:1 |
| Mixed Density | 9.16 lbs./gal |
| Mixed Viscosity | 50,000 cps |
| Service Temperature | -67°F – 250°F |
Physical Properties (Cured, 7 days @ 75° F):
| Adhesive Tensile Lap Shear (Polycarb) | 1,400 psi |
| Adhesive Tensile Lap Shear (ABS) | 1,300 psi |
| Adhesive Tensile Lap Shear (GBS) | 3,000 psi |
| Gap Fill | 0.125 in. |
| Impact Resistance | 78 Shore D |
| Solids by Volume | 100 |
| Specific Volume | 25.21 in(3) lb. |
| Tensile Enolgation | 15-25% |
| Tpeel | 35-40 pli |