American Sealants ASI 12SK Butyl Sealant, 10.2 oz Caulk Cartridge

Need Datasheets? Need Accessories?

• Click Here to visit our Datasheet Server (TDS, SDS, Fact Sheets, Selector Guides, etc)
• Check out Popular Accessories below by scrolling down just a bit on this page.
Color
SKU: AMSEAL_12SK_BLACK_10.2OZ_CRTG
Regular price $ 6.49 USD
Currently Out of Stock Call for ETA
Currently Out of Stock Place Order and Call for ETA

SKU

  • Type Sealant
  • Vendor American Sealants
  • SKU AMSEAL_12SK_BLACK_10.2OZ_CRTG

American Sealants ASI 12SK Butyl Sealant is a one-part, butyl-based sealant reinforced with synthetic fibers for better flexibility, adhesion, and versatility than an average butyl. It bonds masonry, steel, aluminum, glass, and other common construction and industrial materials, and holds up to weathering, bubbling, and cracking where ordinary butyl sealants fail. It is used in industrial, professional, and Do-It-Yourself sealing work.

Why Choose This Butyl Caulk Sealant

  • Synthetic fiber reinforcement for extra flexibility and adhesion
  • Non-slump formula, works on overhead and vertical joints
  • Paintable with most industrial and commercial paints
  • Resistant to UV degradation, weathering, and cracking
  • Non-staining to most substrates
  • Easy to dispense and tool across a range of temperatures
  • Low VOC, 259 g/L per ASTM D3960
  • Meets Federal Spec TT-S-01657 Type 1 and AAMA 808.3-05

Popular Uses

  • Glass channel glazing panels
  • Curtain wall joints
  • Sealing insulated glass units in metal and wood frames
  • Bedding thresholds and sealing around EPDM
  • Masonry, sheet metal, and secondary glazing seals
  • General construction and industrial sealing

Butyl Caulk Sealant Specifications

  • Chemistry: One-part butyl rubber
  • Skin time: 24 hours at 75 F
  • Full cure: 21 days at 75 F
  • Packaging: 10.2 oz caulk cartridge, fixed nozzle
  • Colors: Black, Gray, White
  • Shelf life: 1 year at 75 F

Installation

Surfaces must be dry, clean, and free of frost, oil, dirt, and loose material. Install an open-cell backer rod when joint width exceeds 1/2 inch. In shallow joints, install a bond breaker tape to prevent three-point adhesion.

FOR INDUSTRIAL USE ONLY. Refer to the SDS prior to use.

Questions about fit or a bulk order? Call Perigee Direct at (817) 381-9398 or email sales@perigeedirect.com.