Albion 18V Battery Dispensers for 900ml (2:1 ratio) 2-part cartridges E18T900

Product Name

Albion 18V Battery Dispensers for 900ml (2:1 ratio) 2-part cartridges E18T900

Brief Description

A powerful, cordless, 18V Lithium-Ion battery-powered dispenser designed for the precise and efficient application of two-part (2K) adhesives and sealants from 900ml (600x300ml) twin side-by-side cartridges with a 2:1 mix ratio. It offers enhanced mobility, controlled dispensing, and reduced user fatigue for professional applications.

Popular Applications & Uses

- Dispensing two-part epoxies, urethanes, silicones, and methyl methacrylates.- Adhesive bonding and product assembly.- Caulking, sealing, and joint filling in construction.- Concrete repair, crack filling, and bridge deck overlays.- Deck and floor coating.- Anchoring and doweling.- Sealing seams and joints in automotive and marine industries.- Structural glazing.- Solid surface adhesive application.

Industries that Commonly Use It

- Construction/ Building Services- General Manufacturing- Automotive Service/Repair- Marine- Cabinet & Woodworking- Concrete- Flooring Installer or Manufacturer- Metal Fabrication- Plastic Fabrication- Distributers & Resellers- Industrial Supply

Special and Unique Features

- 18V Lithium-Ion battery power for fade-free operation and portability.- High thrust force (950 lbf) for dispensing high-viscosity materials.- Variable speed trigger and remote speed dial for precise flow control.- Instant drive disengagement (anti-drip feature) to prevent material run-on.- Ergonomic design to reduce wrist strain.- Fast 30-minute battery recharge time.- Battery fuel gauge to display remaining run-time.- Rigid carriage and robust gear case for durability.- Designed for 900ml (600x300ml) 2:1 mix ratio twin side-by-side cartridges.- Can dispense an entire load at full speed in approximately 35 seconds.- Dispenses up to 25 loads on one charge (varies with material viscosity).

Key Properties

- Power Source: 18V Lithium-Ion Battery- Cartridge Capacity: 900ml (specifically 600x300ml twin side-by-side)- Mix Ratio: 2:1 (two-part)- Thrust Force: 950 lbf (pounds-force)- Battery Recharge Time: 30 minutes- Flow Control: Variable speed trigger, instant drive disengagement- Ergonomics: Designed to reduce wrist strain- Durability: Robust gear case, rigid carriage

Surface Compatibility

This product dispenses various two-part adhesives and sealants, and its compatibility depends on the specific material being used. Commonly dispensed materials (epoxies, urethanes, silicones, methyl methacrylates) are compatible with a wide range of substrates including:- Metals- Plastics- Glass- Fiber-reinforced plastic- Concrete- Wood- Masonry- Various building materials for sealing and caulking applications.

Known backups / known substitutes

- Manual two-part cartridge dispensers (e.g., Albion B26T600 manual dispenser).- Pneumatic two-part cartridge dispensers (e.g., Albion AT900 pneumatic dispenser).- Other brands of 18V or 20V cordless multi-component adhesive/caulk guns (e.g., DeWalt, Milwaukee, Makita, Irion-America).- Smaller capacity cordless multi-component dispensers (e.g., for 300ml or 400ml cartridges).- Automated 2K Meter-mixing and Dispensing Systems for high-volume industrial applications.

Comparison Note

The Albion E18T900 offers significant advantages over manual dispensers due to its 18V battery power, providing consistent high thrust force, precise flow control, and reduced user fatigue, especially for high-viscosity materials and large projects. Compared to pneumatic dispensers, it offers greater portability and eliminates the need for air compressors and hoses. It is specifically designed for 900ml (2:1 ratio) twin cartridges, offering a specialized solution for larger two-part adhesive applications where other cordless guns might only handle smaller cartridges or single-component materials.