3M ScotchWeld DP-100NS (thick NonSag) Translucent 3-5 Minute Set (Work Life) Epoxy Adhesive is an extra fast set/cure rigid multipurpose, two-component, room temperature translucent-drying epoxy adhesive of good strength and toughness.
It is an excellent bonder for Steel (ferrous and stainless), Aluminum, and many types of Plastics.
Please Note: These cartridges are designed to work best with a 50ml cartridge Dispenser. It is strongly advise you use a 50ml Dispenser for this cartridge. This 3M cartridge will fit into any standard ‘Square-Back’ Dispenser. If you do not have one, please check out the “MixPac 50ml Dispenser” here on Amazon.
Work Time: 3-5 minutes set Handling Strength: 15-20 minutes
Full Cure Strength: 24 hours
Viscosity: Thick Non-Sag Gel (95,000 cps)
Note: The following technical information and data should be considered representative or typical only and should not be used for specification purposes.
Typical Cured Physical Properties:
Color Translucent Clear
Shore D Hardness 80-85
Time to Handling Strength 15-20 min. @ 23°C (73°F)
Full Cure Time 24-48 hours @ 23°C (73°F)
We Also Recommend
3M ScotchWeld DP460NS (NonSag) Off-White 60-Minute Toughened Epoxy Adhesive
3M ScotchWeld DP420 NS (NonSag) Black 20-Minute Toughened Epoxy Adhesive