1950 Siaspeed PSA Sanding Disc Rolls
Need Datasheets? Need Accessories?
• Click Here to visit our Datasheet Server (TDS, SDS, Fact Sheets, Selector Guides, etc)• Check out Popular Accessories below by scrolling down just a bit on this page.
SKU:
SIA_1950_ROLL_06IN_0180
Regular price
$ 58.49 USD
Currently Out of Stock
Call for ETA
SKU
- Type Sanding Disc Rolls
- Vendor Sia Abrasives
- SKU SIA_1950_ROLL_06IN_0180
Description
These Sia 1950 Siaspeed PSA disc rolls come in 5 inch and 6 inch diameters with adhesive (PSA) backing, in grits from 40 to 500. Sold as a roll rather than pre-cut boxed discs, they let the shop peel off only the discs needed for the job, which cuts waste on high-volume work. Common in automotive body shops and paint prep for no-hole, non-vacuum sanders, and in general surface prep work.
Note: one 5 inch, 40-grit variant in this listing carries a known data discrepancy from Chemical Concepts (the source SKU suffix reads 40 grit, while the product name on record reads 320 grit). It is listed here as 40 grit per the SKU, the agreed source of truth for this build, but should be confirmed with CC before the listing goes live.
Product Name
1950 Siaspeed PSA Sanding Disc Rolls
Brief Description
Siaspeed 1950 PSA disc rolls feed continuous-feed sanders directly from a roll, pairing semi-friable aluminum oxide mineral with a stearate coating that resists loading, available in 5 in and 6 in diameters across grits 40 through 500.
Popular Applications & Uses
- Shaping primer filler ahead of a finish sand
- Sanding filler compound on polyester and composite substrates
- Leveling wood, metal, and solid-surface panels
- Keying factory primer or previously finished parts before recoat
- Continuous-feed production sanding without stopping to swap pads
Industries that Commonly Use It
- Automotive Service/Repair
- Cabinet & Woodworking
- Countertop
- Fabrication
- Furniture
- General Manufacturing
- Industrial Supply
- Metal Fabrication
- Sign & Display
- Transportation/ Specialty Vehicle
Special and Unique Features
- Stearate coating reduces loading as the disc works, holding a consistent cut rate across the roll
- Semi-friable grain fractures under load to expose fresh cutting points instead of dulling
- Feeds directly into PSA-equipped continuous-feed sanders with no backup pad to manage
- Feed length and splice spacing sized for standard continuous-feed sander hardware
- 4 rolls per box keeps a machine fed through a full shift
Key Properties
- Diameters: 5 in, 6 in
- Attachment: PSA, no-hole
- Mineral: semi-friable aluminum oxide
- Grit range stocked: 40 through 500 across both diameters
- Pack size: 4 rolls per box
Surface Compatibility
- Wood and engineered wood panels
- Solid surface and countertop material
- Primer filler and body filler
- Metal panels ahead of coating
Known backups / known substitutes
No verified cross-reference substitute documented for the Siaspeed 1950 PSA roll format; verify feed width and splice spacing before substituting a different roll product.
Comparison Note
Unlike the boxed 1950 discs sold as pre-cut circles, the roll format is built for continuous-feed machines that cut their own disc from the strip, making it the right call for production lines rather than hand-fed random-orbit sanders.
Visit our datasheet server to download a variety of documents for this formula, as well as for all other formulas and products that Perigee Direct carries.
And especially if you are considering or comparing a few different formulas. Our datasheet server can help you download the necessary data to help u decide and keep your project going.
Click Here to visit our Datasheet Server (TDS, SDS, Fact Sheets, Selector Guides, etc)
And especially if you are considering or comparing a few different formulas. Our datasheet server can help you download the necessary data to help u decide and keep your project going.
Click Here to visit our Datasheet Server (TDS, SDS, Fact Sheets, Selector Guides, etc)