Premera EasyMVB Moisture & Vapor Barrier Primer for Solid & Impervious Surfaces like Concrete, Brick, Clay, Tiles

Premera EasyMVB (previously HLT) is a unique spray-on, roll-on, brush-on surface primer/sealer providing a moisture/vapor barrier for concrete, brick, mortar, tile, clay, etc.  It comprises specialized reactive chemicals in a colloidal silica matrix.  It is a direct-to-surface bonding primer that creates a molecular bridge between the coated surface and other coatings that may get applied.

When applied to concrete, mortar, brick, tile, clay, etc, Premera EasyMVB penetrates to seal, densify, and harden porous surfaces by reacting with free calcium hydrates to form an insoluble, permanent barrier. This reaction creates a moisture vapor barrier within concrete—eliminating vapor transmission and solving hydrostatic pressure challenges.

EasyMVB also serves as a complementary pre-primer treatment for Premera’s sol-gel based products (e.g., Premera T2, Premera T9, etc), enabling up to 25 lbs of moisture vapor resistance when used in combination and effectively mitigating adhesion issues caused by moisture vapor.

As a standalone treatment, EasyMVB reduces porosity, prevents efflorescence, improves water resistance, and enhances overall surface properties. It is recommended for use under coatings, liners in immersion applications, adhered waterproofing membranes (including structures under hydrostatic pressure), and as a water-resistant sealer for micro-leaks in floors, walls, and basements.

EasyMVB creates a molecular bond that eliminates the need for mechanical abrasion and adds corrosion protection and works especially well when other water-based coatings may not be compatible as topcoats. 

Amazing Fact about Premera EasyMVB:

• No grinding, no sanding, and no surface profiling are needed to achieve strong chemical bonds to concrete, tile, and stone surfaces. Just a light cleaning and removal of oils or greases if they exist on the surface.

Coverage Surface Area:

• 300-400 Square Feet per Gallon
• Coverage will vary depending on the porosity and texture of the substrate.

Surfaces to Use on:

• Concrete (flooring, walls, cinder blocks & concrete blocks, unglazed brick & tile, pavers, countertops)
• Brick
• Morter
• Clay
• Tiles

Industries currently using FP1, EasyMVB & T2:

• Aviation, Airliners, Manufacturing, Municipalities, Government, Military, Restaurants, Auto Dealerships, Cabinet Makers, Sign Makers,

Features:

• Removes the need to grind, sand, or profile substrates or coatings before top coating
• Provides strong bonding to the difficult-to-bond or low/no-profile surfaces
• 90-minute window to apply overcoat/topcoat atop EasyMVB. (If the window is missed, run a screen or light abrasion and reapply.)
• Chemical bonds to substrate and topcoat. Becomes one with the surface they are applied to.
• Use with concrete, stones, tile, porcelain, glass… Both porous and non-porous substrates.
• Single component (1-Part), spray-down or roll-down primer
• UV stable and virtually invisible
• Water Repellent
• Resists Corrosion
• Abrasion Resistant
• No Sanding Between Coats
• Optimizes Adhesion Between Substrate & Paint
• Multi-surface Compatibility
• High Durability
• Transparent & Lightweight
• Non-Carcinogenic

Superior resistance against:

• Rust & Oxidation
• Corrosion
• Acid Rain & Acidic Damage
• Mold
• Mildew
• Moss
• Moisture
• Ice Damage
• Chlorides & salt spray
• UV damage
• Galvanic corrosion
• Animal, Bird & Organic waste damage
• Gum
• Graffiti

Available in: 8-oz Spray, Quart Kit, Gallon Kit, 5-Gallon Kit, 250-Gallon Tote

How to apply:

Pressure sprayers: Apply using a standard high-volume low-pressure sprayer (HVLP… popular with paint spraying and airbrushing) or hand-pump pressure sprayers with a 1.0-1.3 spray tip and air pressure set at 25 to 30 psi. Spray the test pattern on cardboard or paper to ensure a suitable 8“ to 10” elongated spray pattern is achieved (approximately 1 ½ inches wide in the middle and fluid enough to cover but not puddle). Apply two thin coats, wet-on-tack, 2-3 WFT each, top to bottom, then right to left, keeping a wet edge.

Topcoat or second coat must be applied within 10-15 minutes while the first coat is still tacky for optimum results.  As long as the EasyMVB coating is tacky (not runny and not dry/hard), you can apply your topcoat. You will typically have about 1 hour or a little more time to apply your next coating layer atop the EasyMVBonce applied.

Standard Paint Rollers: Use a high-density, ultra-smooth foam roller or ¼ inch nap roller to apply the coating in an up-and-down and then left-to-right pattern to ensure complete coverage of the surface. Avoid overworking the coating. Apply coating thinly, 2.0 to 3.0 wet film thicknesses (WFT) and continue forward. Avoid down pressure on the roller for best results in finish appearance.

Topcoat or second coat must be applied within 10-15 minutes while the first coat is still tacky for optimum results.  As long as the EasyMVB coating is tacky (not runny and not dry/hard), you can apply your topcoat. You will typically have about 1 hour or a little more time to apply your next coating layer atop the EasyMVB once applied.

Brush Application: Use a high-quality brush to apply EasyMVB in a cross pattern; pattern up and down, then left and right as quickly as possible. Avoid overworking the coating, as it dries quickly. Avoid down pressure on the brush for the best results in finish appearance. Apply light strokes using the tip brush to smooth out the coating if necessary. Desired wet film thickness (WFT) is approximately 2.0 to 2.5 mils.

Topcoat or second coat must be applied within 10-15 minutes while the first coat is still tacky for optimum results.  As long as the EasyMVB coating is tacky (not runny and not dry/hard), you can apply your topcoat. You will typically have about 1 hour or a little more time to apply your next coating layer atop the EasyMVB once applied.

Additional information