Maven MMA8005-W Polyolefin Adhesive for PE & PP | 10:1

Need Datasheets? Need Accessories?

• Click Here to visit our Datasheet Server (TDS, SDS, Fact Sheets, Selector Guides, etc)
• Check out Popular Accessories below by scrolling down just a bit on this page.
Shelf Life
Size
Pick your Kit
SKU: MV_MMA8005-W_050ML
Regular price $41.00 CAD
8 units available
8 units are available

SKU

  • Type Acrylic (MMA)
  • Vendor Perigee Direct
  • SKU MV_MMA8005-W_050ML

Maven MMA8005-W is a white, two-part acrylic adhesive for difficult-to-bond plastics, especially polyethylene and polypropylene. Choose a cartridge for controlled dispensing or a bulk adhesive-and-activator kit for larger jobs.

Why choose MMA8005-W?

  • Formulated for low-surface-energy plastics, including PE, HDPE, LDPE, LLDPE and PP.
  • 10:1 mix ratio by volume.
  • Short 2–5 minute working window at 75°F (24°C), so prepare and position parts before mixing.
  • Choice of 50 mL and 490 mL cartridges, dispensing kits and a 1.1 gallon bulk kit.

Choose your size and kit

Size Options
50 mL Cartridge + Nozzle, Hand Plunger Kit, Caulk-Gun Adapter Kit, or Dispensing Gun Kit.
490 mL Cartridge + Nozzle or Dispensing Gun Kit.
Bulk Container 1.1 Gallon Kit containing adhesive and activator.

Choose the tool configuration you need. A Cartridge + Nozzle option does not include a dispensing gun. Use the correct 10:1 cartridge applicator and matching mixer for the selected cartridge size. A caulk-gun adapter is an adapter configuration, not a dispensing-gun kit.

Shelf-life options

  • Fresh Batch: Standard stock within its labeled shelf life. Available in all listed configurations.
  • Short Shelf Life (1-3 Mths Left): Discounted material with approximately 1–3 months remaining before its labeled expiration date.
  • Recently Expired: Discounted material past its labeled expiration date. Evaluate suitability before use. Fresh-material performance is not guaranteed.

Short-life and expired choices are offered for base cartridges and the bulk adhesive-and-activator kit only. Accessory kits are Fresh Batch only. Discounted material is available only when inventory is shown.

Popular uses

  • Joining polyethylene or polypropylene plastic parts.
  • Plastic component assembly and repair.
  • Fabricating plastic displays, housings and similar assemblies.
  • Evaluating bonded joints where conventional adhesives struggle to adhere to PE or PP.

Technical overview

Chemistry Two-part acrylic (MMA)
Color White
Mix ratio 10:1 by volume
Working time 2–5 minutes at 75°F (24°C)

Working time is the period available to apply and position the adhesive. It is not the full cure time. Follow the current technical data sheet for fixture, handling and full-cure requirements.

Preparation and storage

Keep bonding surfaces clean and dry. Test the actual plastic grade and joint design before committing to a repair or production run. Nylon and other plastics should be assessed individually rather than assuming every grade bonds alike.

Store unopened containers at or below 41°F (5°C), following the product label and current technical data sheet. Allow the sealed material to reach room temperature before use. The listed storage guidance calls for 24 hours of conditioning.

Considering an alternative formula?

Perigee lists MMA8005-W as a backup candidate when evaluating 3M DP8005, SCIGRIP SG400-LSE or Permabond TA4600-series adhesives. These products have different specifications. Validate application requirements before substituting.

Find technical and safety data sheets for mixing, storage and application guidance.