Maven Epoxy & MMA Adhesive Remover – 4 oz Can

Need Datasheets? Need Accessories?

• Click Here to visit our Datasheet Server (TDS, SDS, Fact Sheets, Selector Guides, etc)
• Check out Popular Accessories below by scrolling down just a bit on this page.
SKU: MV_EMR_4OZ
Regular price $37.00 CAD
18 units available
18 units are available

SKU

  • Type Adhesive Remover
  • Vendor Maven
  • SKU MV_EMR_4OZ

Maven Epoxy & MMA Adhesive Remover is a methylene chloride free formula designed to soften cured epoxy and methyl methacrylate (MMA) adhesive so the softened material can be wiped away. Brush it onto the adhesive, allow 1–2 hours before wiping away the softened material, and reapply as needed. Removal results vary with the adhesive.

Surface warning: This remover will damage soft plastics and remove paint. Do not use on soft plastic parts or painted surfaces where the finish must be preserved. Always test a small, hidden area before treating the full surface.

Package size: Sold only as one 4 oz can.

Key Features

  • Methylene chloride free formula.
  • Designed for removing cured epoxy and MMA adhesive.
  • Brush-on application for targeted adhesive cleanup.
  • Allow 1–2 hours for the cured adhesive to soften before wiping.
  • Repeat the process as needed to remove remaining adhesive.
  • Made in America.

Directions for Use

  1. Prepare: Read all label directions and warnings. Wear chemical-resistant gloves and eye protection. Avoid skin contact. Use only outdoors or with adequate ventilation; do not use in enclosed spaces.
  2. Test first: Apply to a small, hidden area to check for damage to the underlying surface or finish.
  3. Brush on: Apply the remover directly over the cured epoxy or MMA adhesive using a brush.
  4. Wait: Allow the remover to work for 1–2 hours before wiping away the softened adhesive and reapplying.
  5. Wipe away: Wipe away the softened adhesive.
  6. Repeat: Reapply the remover to any remaining adhesive, wait another 1–2 hours, and wipe away the softened material. Repeat as needed.

Chemical resistant adhesives: Chemical resistant epoxies and other adhesives may take longer than 1–2 hours to soften or dissolve and may require repeated applications. In some extreme cases, they may not dissolve at all. Complete removal is not guaranteed.

Surface Compatibility & Limitations

Intended for cured epoxy and MMA adhesive removal. The underlying surface must tolerate the remover. It will damage soft plastics and remove paint. A successful spot test is required before use; suitability for other surfaces or finishes is not guaranteed.

Product Specifications

Package size One 4 oz can
Methylene chloride Free of methylene chloride
Physical form Opaque, viscous liquid with aromatic odor
Flash point 72°F (22.2°C), closed cup
Viscosity 1,000–3,000 cP (supplied SDS)
Brand Maven
Product type Epoxy & MMA adhesive remover
Primary use Cured adhesive cleanup
Application method Brush onto cured adhesive
Wait time per application 1–2 hours, until adhesive has softened
Removal method Wipe away softened adhesive; repeat as needed
Surface limitations Damages soft plastics and removes paint
Country of manufacture United States

Safety & Storage

DANGER: Highly flammable liquid and vapor. Harmful if inhaled. Causes skin and serious eye irritation. Causes organ damage; prolonged or repeated exposure may cause organ damage. Keep away from heat, sparks, and flames. No smoking. Do not breathe vapors. Wear protective gloves and eye protection.

Store tightly closed in a cool, ventilated, locked location. Keep out of reach of children. Follow the product label for first aid and disposal instructions. If exposed, call a poison center or doctor immediately. U.S. Poison Control: 1-800-222-1222.