Loctite LB 8065 Copper Grade Anti-Seize Lubricant

Need Datasheets? Need Accessories?

• Click Here to visit our Datasheet Server (TDS, SDS, Fact Sheets, Selector Guides, etc)
• Check out Popular Accessories below by scrolling down just a bit on this page.
Shelf Life
Size
SKU: LT_LB8065_20G
Regular price $16.00 CAD
Currently Out of Stock Call for ETA
Currently Out of Stock Place Order and Call for ETA

SKU

  • Type Anti-Seize Lubricant
  • Vendor Loctite
  • SKU LT_LB8065_20G

Loctite LB 8065 Copper Grade Anti-Seize Lubricant is a copper-colored, naphthenic oil anti-seize compound in a no-drip stick format. It protects threaded fasteners and mating metal surfaces from seizing, galling, and corrosion in high-heat service, and it keeps parts turning freely for cleaner, easier disassembly later.

Its stick form applies without a brush or spatula and won't drip or run, which suits field maintenance and overhead work. It is compatible with copper, brass, cast iron, steel, and stainless steel and other alloys, and it is rated for continuous service to 1800°F (982°C).

Key Features

  • Protects against seizing, galling, and corrosion up to 1800°F (982°C)
  • No-drip stick format; no brush or spatula required
  • Compatible with copper, brass, cast iron, steel, and stainless steel alloys
  • Improves clamp-load uniformity across multiple fasteners at the same torque
  • Non-water-soluble; resists wash-out
  • Non-curing; parts remain easy to disassemble

Common Uses

  • Exhaust manifold bolts, flanges, and studs
  • Fasteners on steel mill, power plant, and foundry equipment
  • Marine equipment and petroleum/chemical processing hardware
  • Automotive and heavy-truck high-heat fasteners
  • Original equipment assembly and field maintenance requiring later disassembly

How to Use

  1. Clean mating surfaces free of grease and dirt. Wear a dust mask when grinding or wire-brushing threads.
  2. Advance the stick and apply a thin, even coating to the threads and bolt flats.
  3. Assemble and torque as required.

Product Specifications

Brand Loctite
Product LB 8065 Copper Grade Anti-Seize
Technology Anti-seize (non-curing)
Chemical Type Naphthenic oil
Appearance / Form Copper-colored stick
Specific Gravity (25°C) 1.18
Penetration (ISO 2137) 20–80 (1/10 mm)
Copper Corrosion (ISO 2160) Slight tarnish, 1a
Dimensional Stability (77°C) Pass
Operating Temperature Continuous service to 1800°F (982°C)
Torque Coefficient (K-factor) 0.16 lubricated (phosphate-coated SAE Grade 5 bolts); 0.19 unlubricated
Item Number 466863 (Henkel item 37229)

Important Limitations

Not recommended for pure oxygen or oxygen-rich systems, or as a sealant for chlorine or other strong oxidizing materials. Store unopened product in a dry location; optimal storage 46°F to 70°F (8°C to 21°C). Storage below 46°F or above 82°F (8°C or 28°C) can adversely affect product properties. This product is regulated for ocean (IMO/IMDG) transport only — as an Environmentally Hazardous Substance, Solid, N.O.S. (copper), UN3077, Class 9, Packing Group III, due to its copper content as a marine pollutant — and is not regulated for U.S. DOT ground or IATA/ICAO air transport. California Proposition 65 warning: this product can expose you to chemicals known to the State of California to cause cancer. For safe handling and complete precautions, consult the product Safety Data Sheet.