Loctite 268 Primerless High Strength Threadlocker Stick

Need Datasheets? Need Accessories?

• Click Here to visit our Datasheet Server (TDS, SDS, Fact Sheets, Selector Guides, etc)
• Check out Popular Accessories below by scrolling down just a bit on this page.
Shelf Life
Size
SKU: LT_268_9G
Regular price $38.00 CAD
Currently Out of Stock Call for ETA
Currently Out of Stock Place Order and Call for ETA

SKU

  • Type Threadlockers
  • Vendor Loctite
  • SKU LT_268_9G

Loctite 268 Threadlocker is a red, high-strength anaerobic threadlocker supplied in a convenient wax-consistency stick for no-drip, no-mess application directly onto fastener threads. It locks and seals metal fasteners against loosening from shock and vibration in permanent-type assemblies not expected to be serviced with standard hand tools.

Like Loctite's other stick-format threadlockers, it is self-feeding and swipes cleanly onto threads without dripping or running, which suits overhead or hard-to-reach fasteners. It bonds without a primer on both active metals and passive substrates such as stainless steel and plated surfaces, and it fluoresces under UV light for inspection.

Key Features

  • High-strength anaerobic threadlocker for permanent-type assemblies
  • No-drip stick (wax) format eliminates mixing, mess, and runoff
  • Primerless bond on stainless steel, plated surfaces, and other passive metals
  • Fluoresces under UV light for quality inspection
  • Operating temperature range: -55°C to 150°C (-67°F to 302°F)
  • Disassembly requires localized heat (~250°C / 480°F)

Common Uses

  • Permanent-type locking and sealing of nuts, bolts, and studs on vibrating equipment
  • Pumps, gearboxes, motors, and presses
  • Automotive and heavy-truck manufacturing and remanufacturing
  • General industrial manufacturing and assembly
  • Overhead or hard-to-reach fasteners where liquid threadlockers may drip

How to Use

  1. Clean fastener threads with a Loctite solvent and allow to dry.
  2. Advance the stick and swipe it directly onto the male threads, removing any skin that has formed on the tip first.
  3. Apply enough product to fill the threads in the area where the nut or fastener will engage. Recap after use.
  4. Assemble and torque as required. Allow the full cure time before placing the joint into service.

Product Specifications

Brand Loctite
Product 268 Threadlocker
Technology Acrylic (dimethacrylate ester), anaerobic cure
Appearance / Form Red, wax-consistency stick
Specific Gravity (25°C) 1.03
Melting Point >65°C
Breakloose Torque (1 hr @ 25°C, steel) ≥8 N·m (≥71 lb·in)
Breakloose Torque (24 hr @ 22°C) Steel grade 2/5: ≥17 N·m (≥150 lb·in); M10 black oxide: 40 N·m (355 lb·in); Stainless: 23 N·m (205 lb·in)
Operating Temperature -55°C to 150°C (-67°F to 302°F)
Hot Strength Retention 100% at 0°C, 75% at 100°C, ~25% at 150°C
Disassembly Requires localized heat to ~250°C (480°F)
9 g Item Number 826036 (Henkel item 37685)
19 g Item Number 826035 (Henkel item 37686)

Important Limitations

Not recommended for pure oxygen or oxygen-rich systems, chlorine, or thermoplastic substrates. Store unopened product in a dry location; optimal storage 46°F to 70°F (8°C to 21°C). Storage below 46°F or above 82°F (8°C or 28°C) can adversely affect product properties. This product is regulated as a DOT/IATA/IMDG hazardous material (UN3077, Class 9, Packing Group III, RQ Environmentally Hazardous Substance, Solid, N.O.S.) due to organic peroxide (cumene hydroperoxide) content — ship and handle accordingly. California Proposition 65 warning: this product can expose you to chemicals known to the State of California to cause cancer. For safe handling and complete precautions, consult the product Safety Data Sheet.