Loctite 248 Threadlocker Stick – Primerless Medium Strength

Need Datasheets? Need Accessories?

• Click Here to visit our Datasheet Server (TDS, SDS, Fact Sheets, Selector Guides, etc)
• Check out Popular Accessories below by scrolling down just a bit on this page.
Shelf Life
Size
SKU: LT_248_9G
Regular price $38.00 CAD
Currently Out of Stock Call for ETA
Currently Out of Stock Place Order and Call for ETA

SKU

  • Type Threadlockers
  • Vendor Loctite
  • SKU LT_248_9G

LOCTITE® 248™ is a blue, medium-strength anaerobic threadlocker in a convenient semi-solid stick. It locks and seals threaded metal fasteners against loosening and leakage from shock and vibration, while remaining removable with ordinary hand tools for service and maintenance.

The self-feeding stick swipes directly onto threads without dripping or running, making it especially useful for vertical, overhead, and hard-to-reach assemblies. It works without primer on active and passive metals—including stainless steel, aluminum, and plated surfaces—and tolerates light contamination from common corrosion-prevention and cutting oils.

Key Benefits

  • Medium-strength, service-removable threadlocking for metal fasteners
  • No-drip, no-mess stick format with direct-to-thread application
  • Primerless performance on active and passive metals
  • Helps prevent loosening and leakage caused by shock and vibration
  • Fluoresces under UV light for inspection

Popular Applications

  • Nuts, bolts, and studs on pumps, gearboxes, motors, and presses
  • Automotive, transportation, and heavy-equipment maintenance
  • Industrial manufacturing, assembly, and remanufacturing
  • Vertical or overhead fasteners where liquid threadlocker may run

Product Specifications

Technology Acrylic; dimethacrylate ester
Color / Form Blue, wax-consistency semi-solid stick
Components One component; no mixing
Cure Anaerobic
Strength Medium; removable with hand tools
Fixture Time 5 minutes
Breakaway Torque 23 N·m (200 lb·in), M10 black-oxide steel nuts and bolts, cured 24 hr at 25°C
Breakloose Torque 8–32 N·m (70–285 lb·in), 3/8-16 steel nuts and bolts, cured 24 hr at 25°C
Application / Service Temperature -55°C to 150°C (-65°F to 300°F)
Specific Gravity 1.03
Melting Point >65°C
Compatible Substrates Metal, including passive metals such as stainless steel, aluminum, and plated surfaces
Package Sizes 9 g stick #826034; 19 g stick #462476

Application and Cure Guidance

  1. For best results, clean internal and external threads with a LOCTITE cleaning solvent and allow them to dry. Lightly oiled “as-received” fasteners may not require aggressive cleaning.
  2. Advance only enough stick for the application and remove any skin from the tip.
  3. Swipe enough product onto the male threads to fill the engaged thread roots, then assemble and tighten as required.
  4. If cure is too slow on passive metals or below 5°C, apply LOCTITE SF 7649 activator and allow it to dry before assembly. Activator can reduce ultimate bond strength, so confirm performance for the application.

Important Limitations and Safety

Not recommended for pure oxygen or oxygen-rich systems, or as a sealant for chlorine or other strong oxidizers. Not normally recommended for plastics because stress cracking may occur; confirm compatibility before use. Store unopened in a dry location at 8°C to 21°C (46°F to 70°F). The current U.S. SDS classifies the material for ground, air, and water transport as UN3077, Class 9, Packing Group III; packaging-specific exceptions must be evaluated separately. Review the current Safety Data Sheet before use and shipment.