Albion B26T400X4 Manual 2-Part Dispenser for 400ml & 415ml Cartridges 4:1 mix ratio

Albion Dispensers for 400ml, 490ml, 385ml, 415ml 2-part cartridges 1:1, 2:1, 4:1 or 10:1 Mix ratios - Manual, Pneumatic & 18V Battery

Pneumatic Air Dispensers

• Accepts 10:1 Mix Ratio 450ml to 490ml, Twin side-by-side cartridges.
• Typically used for dispensing solid surface adhesives such as Epoxy, MMA's, Acrylics, Urethanes, Polyurethanes, Polyureas, Polyesters, SMP's, 2-Part Silicones, etc
• Popular Standard vs. Suitcase (One-Handed Operation) available. Suitcase option allows for operator to dispense with just one hand, especially for tight or hard to reach areas.
• Ergonomic design - PATENTED One-hand operation with improved control means easier and more comfortable material dispensing.
• Faster flow increases productivity - More power from a 4" diameter cylinder dramatically increases the flow of material.
• Responsive - Improved trigger control, easy access regulator, and pneumatic forward and reverse.
• Adaptable - Quickly change over from one-hand to two-hand configurations.
• Easy reload - Truly functional upright position allows easy load and unload.
• Rugged construction - Albion's legendary quality and state-of-the-art engineering ensures that the tool can handle rugged conditions.

Manual Dispensers

• Albion's B-Line B26 series Multi-Component Dispensing Gun with smooth & powerful High Thrust 26:1 Ratio Drive.
• Dispensers configurable for all major ratios 1:1, 2:1, 4:1, 10:1 mix ratio (395ml, 400ml, 415ml, 450ml to 490ml) twin side-by-side cartridges.
• Typically used for dispensing solid surface adhesives such as Epoxy, MMA's, Acrylics, Urethanes, Polyurethanes, Polyureas, Polyesters, SMP's, 2-Part Silicones, etc
• Albion's legendary double gripping plates and steel trigger means increased durability.
• Adjustment screw technology means increased life of the gun - as the tool wears you can adjust the screw to eliminate wasted motion.
• Full size handle for comfortable, efficient dispensing.
• Designed for Thin or Thick materials.

18V Battery Power Dispensers

• Albion's powerful 18V cordless drive system coupled to a sturdy carriage for dispensing 400-series d-part cartridges
• Configurable for all major ratios (1:1, 2:1, 4:1, 10:1)
• Flow control - instant drive disengagement when trigger is released
  
• Ergonomic design - reduces wrist strain
• Supplied fully assembled. Kit Includes:
  • (1) 982-2 18V Lithium-Ion Battery Pack
  • (1) 982-21 Charger for 18V Lithium-Ion Battery (30 minute).
• Improvements over Albion 2nd generation cordless guns:
  • Generates 50% more force (950 lbs.)
  • Constant flow with no motor oscillation
  • More robust gear case
  • More efficient motor
  • Li-Io Battery is 50% lighter than NiCad model
  • 40% longer run time compared to NiCad with no fade
  • 50% faster recharge (30 minutes)
  • Wider operating temperature - down to 0°F
  • Fuel gauge shows how much charge is left in battery
  • More battery shock resistance means longer life

• Powered by Milwaukee® REDLITHIUM^TM Battery Technology

18V Battery 982-2

• 18V of long-lasting, fade-free Lithium-Ion power
• 5 amp-hour capacity
• Recharge time 30 minutes
• Equivalent run time with 40% less weight than an 18V NiCad battery
• Individual Cell Voltage Monitoring-ensures optimal charge and discharge for maximum life
• Battery Fuel Gauge - Displays remaining run-time

Battery Charger 982-21 - 18V & 12V Batteries (USA version)

• Recharges both12V & 18V Lithium-Ion batteries in 30 minutes
• Replaces either #982-3 or #1004-4 battery chargers
• 110V AC
• Also available: Australian version (982-18), Euro version (982-19) and UK version (982-20)