Maven Plastics - HDPE "Safety Orange" (DOT Complaint) Plastic Welding Rods, Coils & Reels (For Assembling or Repairing Safety Orange Equipment)
Need Datasheets?
Click Here to visit our Datasheet Server (TDS, SDS, Fact Sheets, Selector Guides, etc)Maven Plastics - "Safety Orange" HDPE Polyethylene Plastic Welding Rods, Coils & Reels
Our Safety Orange, is a bright orange color, that is also DOT Complaint for repair of Traffic Barricades & Cones.
These plastic welding rods are approved for use in all of the following non-potable systems (For all repair and marking/identification uses):
- Non-Potable water
- Reclaimed water
- Rainwater harvesting
- Gray water
- SharkBite Reclaimed
Plastic Welding Rod Specs:
- 100% pure homogeneous HDPE material
- Shape Options are:
- Round 1/8 inch (3mm), 5/32 inch (4mm), and 3/16 inch (5mm)
- Triangle 7/32 inch (5.7mm)
- Flat 1/16 x 5/8 (1.6mm x 16mm)
- Packaging Options are:
- Rods come in packs of 10, 20 & 40 Rods each
- Coils come in 100-ft (approx 1/2 pound) and 200-ft (approx 1 pound)
- Reels come in 500ft (aapprox 2.5 Lbs), 10-Lbs, 20-Lbs, and 50-Lbs
Made of 100% pure HDPE plastic (High Density Polyethylene), no impurities. All Plastic Rods, Coils & Reels should be used with an appropriate plastic welding iron, heat dispenser or torch with applicable attachments.
HDPE Rods, Coils & Reels can be used for several popular types of repair jobs, but each plastic repair job needs to be carefully matched to the same type of Plastic Rod or Coil. These Rods, Coils & Reels are HDPE Polyethylene Plastic.
Warning: Mixing different types of plastics will likely result in poor quality repairs and poor longevity of the welds. Quite Simply, match your plastics and you're good... different plastics simply don't work well together.
HDPE Rods, Coils & Reels: Use with any plastic labeled Recycling # 2. Also typically includes Plastic Barrels, Chemical Resistant Containers, Plastic Dustbins, Chemical-resistant pipes, plastic carrying cartons