LORD Fusor 2098 Structural Epoxy Adhesive, 210 mL

LORD Fusor 2098 is a slow-setting epoxy for replacement body panels, weld bonding and rivet bonding. The 210 mL cartridge gives repair technicians a 90-minute working window for panel positioning.

Benefits

• Long 90 minute work time for large or complex panel fits
• Weldable right after positioning for weld-bond and rivet-bond repairs
• Heat cure option cuts clamp and paint time to 30 minutes at 140°F (60°C)
• Listed in Parker's catalog with OEM approvals from Chrysler/Fiat, GM, Honda/Acura and Tesla

Features

• Bonds prepared steel, aluminum, e-coat, bare metal, FRP and plastics
• Blue paste for easy visual mix check

Technical Specifications

• Chemistry: 2-part epoxy
• Color: Blue paste
• Work time: 90 minutes at 70°F (21°C)
• Clamp time: 6 hours at 70°F (21°C), or 30 minutes at 140°F (60°C)
• Paint time: 24 hours at 70°F (21°C), or 30 minutes at 140°F (60°C)
• Cure time: 24 hours at 70°F (21°C), or 2 hours at 140°F (60°C)
• Lap shear (DIN EN 1465): 3336 psi (23 MPa) and 2466 psi (17 MPa) on cold rolled steel and aluminum
• Tensile strength (DIN EN ISO 527-1): 3190 psi (22 MPa)
• Impact wedge peel (ISO 11343): 171.3 pli (30 N/mm)
• Elongation: 20%

Directions for Use

1. Follow the vehicle manufacturer's guidance for removing zinc, aluminum coatings and e-coat.
2. Remove old adhesive and e-coat from flanges. Grind mating flanges (1 inch / 25.4 mm max) with a 100-grit disc or finer.
3. Wipe with a residue-free solvent such as acetone or isopropyl alcohol.
4. Level the plungers, attach a mixing tip and dispense until the color is consistent.
5. Apply a 1/4 to 3/8 inch (6.4 to 9.5 mm) bead, position the panel and clamp. Do not pull the panel away after positioning.
6. Let cure 24 hours at room temperature before painting, or heat cure 30 minutes at 140°F (60°C) to paint right away.

Parker recommends the Fusor 423 mixing tip with a Fusor 502 manual or 504 pneumatic applicator for 210 mL cartridges.

Storage and Shelf Life

18 months from date of manufacture when stored at 75°F (24°C) in the original, unopened container.

Safety and Use Limits

For industrial and professional use. Fusor products are not for adhesive-only bonding of structural components unless the vehicle manufacturer specifically recommends it. Read the current Safety Data Sheet and product label before use.

Popular uses

• Weld bonding of replacement auto body panels
• Rivet bonding of replacement auto body panels
• Bonding structural and non-structural replacement panels on steel and aluminum

Choose your shelf life

• Fresh Batch: Standard stock within its labeled shelf life. This does not specify a manufacture date or guarantee a full original shelf-life period.
• Short Shelf Life (1-3 Mths Left): Discounted stock with approximately 1–3 months remaining before the labeled expiration date.
• Recently Expired: Discounted stock past its labeled expiration date. Manufacturer performance and approvals are not assured for expired material.

Short-life and expired stock are available only when inventory is shown. Confirm batch suitability and follow OEM shelf-life requirements before repair use. Published technical values describe material used within manufacturer conditions.

Available size

• 210 mL (7.1 oz) cartridge, Parker part number 3023758

For detailed product selection and repair timing, see the Parker Fusor product guide.